|
Thread Tools | Search this Thread |
January 17th, 2007, 08:47 PM | #1 |
Tourist
Join Date: Jan 2007
Location: Auckland, New Zealand
Posts: 2
|
Newb question: How do I display timecode from Varicam onto LCD monitor
Hi Everyone.
I would like to know how to have the time code from a Panasonic Varicam (Model: AJ-HDC27H) displayed on a Panasonic LCD Video Monitor (Model: BT-LH900A). The purpose of this is so the script supervisor, on a low budget feature film that I am currently camera assisting on, can record the time code without me having to call it out to her after every take. The camera operator prefers to have a clear viewfinder (no detail or time code displayed). The BNC cable is coming from the HD SDI Mon out on the side of the camera. This is my first time working with a Varicam and I don't have the time to thoroughly check through the Operating Instructions. I have tried briefly but have been unsuccessful. If anyone on these boards is able to help I would greatly appreciate it. Kind Regards Gabriel. |
January 30th, 2007, 05:22 AM | #2 |
Tourist
Join Date: Jan 2007
Location: Auckland, New Zealand
Posts: 2
|
bump. anyone?
|
| ||||||
|
|