|
|
|
|
|
June 6th, 2004, 03:16 PM
|
#1 |
|
Regular Crew
Join Date: Mar 2004
Location: Berkshire, UK
Posts: 107
|
Steadicam JR with PDX10
Quick couple of questions for anyone who uses the Steadicam JR with the PDX10:
1. Does the supplied video cable fit the PDX10 (S Video or the yellow jack?) From looking at the online manual it looks like a different type of connector is supplied. 2. Does the pause control work, and do I need to order a separate cable for this? Again, the manual isn't entirely clear on this point. 3. Being as things flapping around don't help the balance, do people remove (cut off) the flap that covers the connectors on the PDX10, or just leave it hanging there? |
|
|
|
June 6th, 2004, 08:12 PM
|
#2 |
|
Wrangler
Join Date: Jan 2002
Location: Los Angeles, CA
Posts: 6,810
|
Pat:
Can't help you with 1 or 2...but my recommendation for 3 is to use a little adhesive-backed velcro on the flap and as needed on the body so you can swing it up and fasten it for Steadicam use, but still have it to protect your connectors otherwise.
__________________
Charles Papert www.charlespapert.com |
|
|
|
 |
| ||||||
|
||||||
|
|
