Firmware 1.1 and S-log available June 1

Doug Jensen · June 4th, 2011, 04:33 AM

As I said in an earlier post, the new firmware works fine with both my Sony adapters (SD and Memory Stick) so I'm sure it was tested with them.

Nick Hiltgen · June 4th, 2011, 11:20 AM

For anyone that is nervous about the upgrade. I was able to install the firmware on an e-films MxR card (with a PNY 32GB class 10 SDHC card inside) and afterwards was able to record and play back on the e-CLR and the MxR cards with the PNY 32GB cards inside.

So in my experience I have had no ill effects with the install using the MxR cards nor have I had any issues after the upgrade with the MxR cards.

That being said, I had a funny thing happen immediately after the camera was upgraded where on the reboot nothing happened. I pulled the power supply and battery and the powered it up again and had no issues. I'm going to attribute that to some weird firmware strangeness and the camera waking up dumb, no issues afterwards though, and like I said all sdhc sxs card adapters are currently working. I'll post an update if something changes.

Chuck Fishbein · June 4th, 2011, 12:06 PM

Just upgraded without any issues.
I did have some problems accessing the download site using Safari. No problem with Firefox.

Nate Weaver · June 4th, 2011, 01:02 PM

Updated yesterday with Hoodman adapter and Lexar SD cards.

No probs with update, and no problems rolling a little footage so far.

Leonard Levy · June 4th, 2011, 02:18 PM

Have any of you guys gotten the S&Q dial working? There was a thread that said you need to hold the cancel button down (or push S&Q and cancel at the same time?) to enable it for menus and again to return to S&Q mode.

Nick Hiltgen · June 4th, 2011, 03:05 PM

Just tried it. Yeah you have to hold the cancel button in then tap the s&q button. It then pops up and says "s&q dial: jog dial mode" Tap the s&q button again (while still holding the cancel button) and it changes to "s&q dial: s&q dial mode" a little convoluted but i prefer that dial to the menu dial in the back.

Peter Corbett · June 4th, 2011, 04:06 PM

Quote:

Originally Posted by Nate Weaver

Updated yesterday with Hoodman adapter and Lexar SD cards.

No probs with update, and no problems rolling a little footage so far.

Weird, it worked with the MXR adaptor and a Sandisc 32gb, but the Sony MEAD adaptor wouldn't run the upgrade. Anyway, the firmware is updating now...

Andy Shipsides · June 4th, 2011, 07:27 PM

Great to see people figured on the S&Q dial.. damn confusing.

Andy

Michael Carmine · June 5th, 2011, 01:58 PM

I put the card in and it does not see the firmware upgrade? Is there some secret?

Michael Carmine · June 5th, 2011, 03:48 PM

Never mind I got the firmware to the root directory. But my Hoodman Raw sxsxsdhc adapters do not work. The Hoodman 16 gb sdhc 10 raw steel cards do work but in my e-film MxR adapter cards and my Transcend sdhc class 10-16gb cards work fine.

I am returning my Hoodman card adapters to Hoodman for replacements.

Chris Medico · June 6th, 2011, 09:45 PM

Want to report that the firmware update went well and the MxM SDHC adapters with the ATP memory cards are working fine.

WHEW!

Leonard Levy · June 7th, 2011, 10:34 PM

Just upgraded and all is well. Jog wheel is great and no problem with Hoodman Raw adapter and 16G raw Steel SDHC card.

Sam Painter · June 11th, 2011, 02:51 PM

A flashing "Rec 2" comes up screen left of the HD SDI output while I am recording.
I can not get it to go away with display mode. It stays on flashing all the time while in record.
Distracting and annoying.
Anybody have any ideas on how to disable this?
Why does it flash Rec "2" ?
It does not change depending on what card I am recording onto or what record button I push.
Thanks Sam

Alister Chapman · June 11th, 2011, 03:13 PM

You have SDI Rec Control enabled in the Video Set menu. The camera can send a "record" signal down the SDI to trigger external recorders.

Sam Painter · June 11th, 2011, 03:43 PM

Thank you!

June 4th, 2011, 04:33 AM	#31
Doug Jensen Vortex Media Join Date: Jan 2009 Location: Florida Posts: 3,450	Re: Firmware 1.1 and S-log available June 1 As I said in an earlier post, the new firmware works fine with both my Sony adapters (SD and Memory Stick) so I'm sure it was tested with them. __________________ Vortex Media http://www.vortexmedia.com/ Sony FS7, F55, and XDCAM training videos, field guides, and other production tools

June 4th, 2011, 11:20 AM	#32
Nick Hiltgen Trustee Join Date: May 2003 Location: Atlanta GA Posts: 1,427	Re: Firmware 1.1 and S-log available June 1 For anyone that is nervous about the upgrade. I was able to install the firmware on an e-films MxR card (with a PNY 32GB class 10 SDHC card inside) and afterwards was able to record and play back on the e-CLR and the MxR cards with the PNY 32GB cards inside. So in my experience I have had no ill effects with the install using the MxR cards nor have I had any issues after the upgrade with the MxR cards. That being said, I had a funny thing happen immediately after the camera was upgraded where on the reboot nothing happened. I pulled the power supply and battery and the powered it up again and had no issues. I'm going to attribute that to some weird firmware strangeness and the camera waking up dumb, no issues afterwards though, and like I said all sdhc sxs card adapters are currently working. I'll post an update if something changes. __________________ I have a dream that one day canon will release a 35mm ef to xl adapter and I'll have iris control and a 35mm dof of all my ef lenses, and it will be awesome...

June 4th, 2011, 12:06 PM	#33
Chuck Fishbein Major Player Join Date: Jun 2008 Location: Weehawken New Jersey Posts: 210	Re: Firmware 1.1 and S-log available June 1 Just upgraded without any issues. I did have some problems accessing the download site using Safari. No problem with Firefox.

June 4th, 2011, 01:02 PM	#34
Nate Weaver Wrangler Join Date: Oct 2002 Location: Los Angeles, CA Posts: 2,100	Re: Firmware 1.1 and S-log available June 1 Updated yesterday with Hoodman adapter and Lexar SD cards. No probs with update, and no problems rolling a little footage so far. __________________ My Work: nateweaver.net

June 4th, 2011, 02:18 PM	#35
Leonard Levy Trustee Join Date: Feb 2006 Location: USA Posts: 1,684	Re: Firmware 1.1 and S-log available June 1 Have any of you guys gotten the S&Q dial working? There was a thread that said you need to hold the cancel button down (or push S&Q and cancel at the same time?) to enable it for menus and again to return to S&Q mode.

June 4th, 2011, 03:05 PM	#36
Nick Hiltgen Trustee Join Date: May 2003 Location: Atlanta GA Posts: 1,427	Re: Firmware 1.1 and S-log available June 1 Just tried it. Yeah you have to hold the cancel button in then tap the s&q button. It then pops up and says "s&q dial: jog dial mode" Tap the s&q button again (while still holding the cancel button) and it changes to "s&q dial: s&q dial mode" a little convoluted but i prefer that dial to the menu dial in the back. __________________ I have a dream that one day canon will release a 35mm ef to xl adapter and I'll have iris control and a 35mm dof of all my ef lenses, and it will be awesome...

June 4th, 2011, 07:27 PM	#38
Andy Shipsides Sponsor: Abel CineTech Join Date: Feb 2009 Location: New York, NY Posts: 361	Re: Firmware 1.1 and S-log available June 1 Great to see people figured on the S&Q dial.. damn confusing. Andy __________________ Andy Shipsides -Camera Technology Specialist AbelCineTech, New York - Visit our Blog - http://blog.abelcine.com

June 5th, 2011, 01:58 PM	#39
Michael Carmine Regular Crew Join Date: Mar 2009 Location: NYC/CA Posts: 34	Re: Firmware 1.1 and S-log available June 1 I put the card in and it does not see the firmware upgrade? Is there some secret?

June 5th, 2011, 03:48 PM	#40
Michael Carmine Regular Crew Join Date: Mar 2009 Location: NYC/CA Posts: 34	Re: Firmware 1.1 and S-log available June 1 Never mind I got the firmware to the root directory. But my Hoodman Raw sxsxsdhc adapters do not work. The Hoodman 16 gb sdhc 10 raw steel cards do work but in my e-film MxR adapter cards and my Transcend sdhc class 10-16gb cards work fine. I am returning my Hoodman card adapters to Hoodman for replacements.

June 6th, 2011, 09:45 PM	#41
Chris Medico Inner Circle Join Date: Aug 2006 Location: Efland NC, USA Posts: 2,322	Re: Firmware 1.1 and S-log available June 1 Want to report that the firmware update went well and the MxM SDHC adapters with the ATP memory cards are working fine. WHEW! __________________ http://www.LandYachtMedia.com

June 7th, 2011, 10:34 PM	#42
Leonard Levy Trustee Join Date: Feb 2006 Location: USA Posts: 1,684	Re: Firmware 1.1 and S-log available June 1 Just upgraded and all is well. Jog wheel is great and no problem with Hoodman Raw adapter and 16G raw Steel SDHC card.

June 11th, 2011, 02:51 PM	#43
Sam Painter New Boot Join Date: Feb 2011 Location: Los Angeles, Ca. Posts: 6	Re: Firmware 1.1 and S-log available June 1 A flashing "Rec 2" comes up screen left of the HD SDI output while I am recording. I can not get it to go away with display mode. It stays on flashing all the time while in record. Distracting and annoying. Anybody have any ideas on how to disable this? Why does it flash Rec "2" ? It does not change depending on what card I am recording onto or what record button I push. Thanks Sam

June 11th, 2011, 03:13 PM	#44
Alister Chapman Inner Circle Join Date: Dec 2005 Location: Bracknell, Berkshire, UK Posts: 4,957	Re: Firmware 1.1 and S-log available June 1 You have SDI Rec Control enabled in the Video Set menu. The camera can send a "record" signal down the SDI to trigger external recorders. __________________ Alister Chapman, Film-Maker/Stormchaser http://www.xdcam-user.com/alisters-blog/ My XDCAM site and blog. http://www.hurricane-rig.com

June 11th, 2011, 03:43 PM	#45
Sam Painter New Boot Join Date: Feb 2011 Location: Los Angeles, Ca. Posts: 6	Re: Firmware 1.1 and S-log available June 1 Thank you!