Timecode EX3 at DVinfo.net

Heiner Boeck · January 20th, 2010, 06:00 AM

Hi:
When EX3-recording with a set timecode (i.e. 01:00:00:00), then taking out the card and putting it in again, the timecode from the last recorded clip (i.e. 01:06:03:17) does not continue on the next clip to be recorded but "jumps" back to zero-settings.
Is there any way to "save" the timecode so that it continues - even if the card was taken out for a moment?
Sounds complicated but hopefully somebody checks what I mean...
Thanx: Heiner

Marty Welk · January 20th, 2010, 07:37 AM

the setting for that would normally be called RE-GEN, meaning to regenerate the timecode off the previous timecode . . . i think.

January 20th, 2010, 06:00 AM	#1
Heiner Boeck Regular Crew Join Date: Sep 2009 Location: Varkaus Finland Posts: 33	Timecode EX3 Hi: When EX3-recording with a set timecode (i.e. 01:00:00:00), then taking out the card and putting it in again, the timecode from the last recorded clip (i.e. 01:06:03:17) does not continue on the next clip to be recorded but "jumps" back to zero-settings. Is there any way to "save" the timecode so that it continues - even if the card was taken out for a moment? Sounds complicated but hopefully somebody checks what I mean... Thanx: Heiner

January 20th, 2010, 07:37 AM	#2
Marty Welk Major Player Join Date: Sep 2008 Location: East Bay Cali Posts: 563	the setting for that would normally be called RE-GEN, meaning to regenerate the timecode off the previous timecode . . . i think. __________________ ----------------sig----------------- Re-learning everything all over again, one more time.