EX1 Stronger plate with NanoFlash arm now available. at DVinfo.net

Olof Ekbergh · December 5th, 2009, 12:05 PM

I have finalized the design on the NanoFlash arm.

You will be able to order both arms for $50.00 or 1 for $35.00.

Here are some photos with the arms on an EX1R with 1 or 2 wireless mic receivers as well as the NanoFlash.

The Arms will of course be black anodized finish like the plate and wing.

You may also notice the VCT-U14 wedge on my plate. I love this tripod plate system and I will be selling these wedges for $50.00.

I will be sending out a batch of parts to the anodizer this week, so I will be shipping by the end of this week.

You can order by phone (603-383-9283) or by email, I will be updating the web site soon so you can order the NanoFlash arms as well as the VCT-U14 wedge.

The whole system works on EX1R's as well as EX1.

I made the arm with the use of Swit batteries in mind, even the longest one will fit with either arm. I will post photos of that setup as soon as I receive my battery. I will also be making custom SDI and D-tap to NanoFlash power cable.

The shoulder brace system is next in line and should be shipping in late December.

To order call 603.383.9283 Email: olof@westsideav.com

Or check our website: EX1 Stronger Plates

Graeme Fullick · December 5th, 2009, 01:43 PM

Olof,

Will you ship any of these to Australia if asked?

Paul Cronin · December 5th, 2009, 04:38 PM

Just to add one more positive point to the bottom plate with side wing. I was able to hook up my Nano on the back of the side wing and two Lav receivers on the front with a plate I use with dual lock and shock cord. Works great and fits well on the tripod or shoulder.

Some updated pictures sorry not the nice picture quality Olof has presented I using a $30 still camera ugh. Keep saying time to buy a nice 35mm still.

Olof Ekbergh · December 5th, 2009, 09:26 PM

Graeme Fullick,

Yes I ship to Australia, shipping is $18.00 5-7 days. Contact me if you need faster service for a quote on shipping.
603.383.9283 Email: olof@westsideav.com

Paul Cronin · December 6th, 2009, 09:45 AM

Olof any problem with the Nano in the back and two lav setup using the viewfinder?

Olof Ekbergh · December 6th, 2009, 01:28 PM

Paul,

I just went and double checked on my rig. I even straightened my wing a little extra for more wrist room when handle is at 90º.

When the arm is all the way back I still have no problem using the viewfinder. In the forward or middle position it is not a factor at all.

December 5th, 2009, 12:05 PM	#1
Olof Ekbergh Sponsor: Westside AV Join Date: Dec 2008 Location: Mount Washington Valley, NH, USA Posts: 1,365	EX1 Stronger plate with NanoFlash arm now available. I have finalized the design on the NanoFlash arm. You will be able to order both arms for $50.00 or 1 for $35.00. Here are some photos with the arms on an EX1R with 1 or 2 wireless mic receivers as well as the NanoFlash. The Arms will of course be black anodized finish like the plate and wing. You may also notice the VCT-U14 wedge on my plate. I love this tripod plate system and I will be selling these wedges for $50.00. I will be sending out a batch of parts to the anodizer this week, so I will be shipping by the end of this week. You can order by phone (603-383-9283) or by email, I will be updating the web site soon so you can order the NanoFlash arms as well as the VCT-U14 wedge. The whole system works on EX1R's as well as EX1. I made the arm with the use of Swit batteries in mind, even the longest one will fit with either arm. I will post photos of that setup as soon as I receive my battery. I will also be making custom SDI and D-tap to NanoFlash power cable. The shoulder brace system is next in line and should be shipping in late December. To order call 603.383.9283 Email: olof@westsideav.com Or check our website: EX1 Stronger Plates Attached Thumbnails

December 5th, 2009, 01:43 PM	#2
Graeme Fullick Major Player Join Date: Mar 2005 Location: Newcastle, Australia Posts: 337	Olof, Will you ship any of these to Australia if asked? __________________ Graeme

December 5th, 2009, 04:38 PM	#3
Paul Cronin Inner Circle Join Date: Dec 2005 Location: Rhode Island Posts: 4,048	Just to add one more positive point to the bottom plate with side wing. I was able to hook up my Nano on the back of the side wing and two Lav receivers on the front with a plate I use with dual lock and shock cord. Works great and fits well on the tripod or shoulder. Some updated pictures sorry not the nice picture quality Olof has presented I using a $30 still camera ugh. Keep saying time to buy a nice 35mm still. Attached Thumbnails __________________ Paul Cronin www.paulcroninstudios.com Last edited by Paul Cronin; December 6th, 2009 at 09:47 AM.

December 6th, 2009, 09:45 AM	#5
Paul Cronin Inner Circle Join Date: Dec 2005 Location: Rhode Island Posts: 4,048	Olof any problem with the Nano in the back and two lav setup using the viewfinder? __________________ Paul Cronin www.paulcroninstudios.com

December 5th, 2009, 09:26 PM	#4
Olof Ekbergh Sponsor: Westside AV Join Date: Dec 2008 Location: Mount Washington Valley, NH, USA Posts: 1,365	Graeme Fullick, Yes I ship to Australia, shipping is $18.00 5-7 days. Contact me if you need faster service for a quote on shipping. 603.383.9283 Email: olof@westsideav.com

December 6th, 2009, 01:28 PM	#6
Olof Ekbergh Sponsor: Westside AV Join Date: Dec 2008 Location: Mount Washington Valley, NH, USA Posts: 1,365	Paul, I just went and double checked on my rig. I even straightened my wing a little extra for more wrist room when handle is at 90º. When the arm is all the way back I still have no problem using the viewfinder. In the forward or middle position it is not a factor at all.