|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
November 27th, 2008, 12:28 PM
|
#1 |
|
Trustee
Join Date: Sep 2003
Posts: 1,435
|
24PsF lock
With firmware 1.11, EX1 allows you to use 60i pulldown, or real 24p (PsF) output via HD-SDI.
I always need 24PsF, yet when the cam is turned off, it instantly loses the setting. So when you turn it on again, you'll have to fumble with the menu to restore 24PsF mode again. Is there a way to lock it? |
|
|
|
November 27th, 2008, 12:40 PM
|
#2 |
|
Regular Crew
Join Date: Sep 2008
Location: Indianapolis, Indiana
Posts: 107
|
I noticed my camera does this with the "IR remote" setting. I set it to on, yet every time I turn the camera off then on its set to off again.
|
|
|
|
|
November 29th, 2008, 11:55 PM
|
#3 |
|
New Boot
Join Date: Nov 2008
Location: Modesto California
Posts: 17
|
remote control
I have used almost every video setting the camera has... and it has never reset when I turned the camera off. As far as the remote control, I've never used it.
|
|
|
|
|
December 1st, 2008, 09:19 AM
|
#4 |
|
Major Player
Join Date: May 2006
Location: Tampa, FL
Posts: 596
|
Yes, the RC is designed that way, Jon. Might be nice to have an option to override it, but if you forget it's on, the camera may respond when you didn't intend for it to! That said, I've never had many problems with TV's in my suddenly changing channels on me.
I've assigned button #2 to turn on the remote (BRT DISP). This is working well for me. I can't speak to the HD-SDI output at this time.
__________________
Sony EX3, Vegas 9.0 64bit, Windows 7(64), Core i7, 12GB, RAID1 & 0, HotSwap SATA, 30" LCD(2560x1600)-GTX285 & 24" LCD(1360x768)-7800GT |
|
|
|
|
| ||||||
|
||||||
|
|
