|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
April 4th, 2008, 02:29 PM
|
#1 |
|
New Boot
Join Date: Aug 2007
Location: Barrie, Ontario, Canada
Posts: 11
|
Help, SDI-Out with BNC not working on flyer!
We are about to leave for a wedding.. and..
The SDI-Out with a BNC cable out into the BNC in on monitor on the flyer and we are getting no signal... It doesn't matter if it's set to SD or HD on the camera.. Any suggestions? |
|
|
|
April 4th, 2008, 02:38 PM
|
#2 |
|
Major Player
Join Date: Dec 2007
Location: Northampton, UK
Posts: 259
|
Hi John
Check under the 'Others' menu that I-Link I/O is set to disable. If this is enabled, it disables SDI. Cheers, Nick |
|
|
|
|
April 4th, 2008, 04:02 PM
|
#3 |
|
Regular Crew
Join Date: Feb 2007
Location: Brooklyn NY
Posts: 128
|
The standard flyer monitor is composite only.
|
|
|
|
|
April 4th, 2008, 06:34 PM
|
#4 | |
|
New Boot
Join Date: Aug 2007
Location: Barrie, Ontario, Canada
Posts: 11
|
Quote:
So there is no way to get the SDI out port to work with the standard flyer monitor? We would then need to find another output on the camera? Nick, When we turned it off, we got snow for a second and then back to No Signal. |
|
|
|
|
|
April 4th, 2008, 09:10 PM
|
#5 |
|
New Boot
Join Date: Dec 2006
Location: Marion, IA
Posts: 7
|
The standard Flyer monitor does not accept an SDI signal. You have to use the composite output cable on your EX1, and plug a RCA to BNC adapter to hook it into your sled's BNC connector.
|
|
|
|
|
| ||||||
|
||||||
|
|
