PD150 power supply for PD170? at DVinfo.net

Mark Chafe · October 19th, 2010, 07:48 AM

Just wondering if it is safe to use the PD150 power brick for the PD170 and vice versa? I mistakingly did it once and it worked, but i was a bit concerned.

Thanks

Carlos Viteri · October 19th, 2010, 08:35 AM

Its the same power supply. You can use it without any worry.

Jay West · October 19th, 2010, 09:56 AM

As long as the units have not been damaged, the power supplies are interchangeable. They are all Sony AC-L10 series adapters. Turn one over and look at the upper left corner on the back for the specs. They are all the same specs so you should not have any problems. I've had AC-L10 adapters for the old Sony D8 cams, a TRV 900 and several VX2000s, and all were interchangeable.

October 19th, 2010, 07:48 AM	#1
Mark Chafe Regular Crew Join Date: Dec 2009 Location: Newfoundland, Canada Posts: 162	PD150 power supply for PD170? Just wondering if it is safe to use the PD150 power brick for the PD170 and vice versa? I mistakingly did it once and it worked, but i was a bit concerned. Thanks

October 19th, 2010, 08:35 AM	#2
Carlos Viteri Regular Crew Join Date: Mar 2006 Location: Huntington, NY Posts: 41	Its the same power supply. You can use it without any worry. __________________ Carlos Viteri - www.clvideo.com Where Vision Meets Video

October 19th, 2010, 09:56 AM	#3
Jay West Major Player Join Date: Mar 2010 Location: Red Lodge, Montana Posts: 889	As long as the units have not been damaged, the power supplies are interchangeable. They are all Sony AC-L10 series adapters. Turn one over and look at the upper left corner on the back for the specs. They are all the same specs so you should not have any problems. I've had AC-L10 adapters for the old Sony D8 cams, a TRV 900 and several VX2000s, and all were interchangeable.