I Need A PD170 Remote Control? at DVinfo.net

Allen Campbell · October 3rd, 2010, 09:36 PM

Whats the chances of me finding a stray PD170 remote control?

I cannot post in the classifieds and no moderators will respond. Can anyone tell me whats up with that?

Tom Hardwick · October 4th, 2010, 01:06 AM

As a newbie with only 41 posts under your belt you're probably not considered a regular player yet. If you really want a remote I'd suggest the cheapest way is to borrow the real thing (all Sony camcorders seem to use the same codes, so it doesn't have to be a 170 remote) buy a learning remote and put it face2face with the genuine article and teach it.

tom.

Allen Campbell · October 4th, 2010, 07:41 AM

I see. I have an old Sony CCD-TRV52 camcorder that I'll try. Thanks

Adam Gold · October 4th, 2010, 01:55 PM

A quick Internet search reveals that it is called the RMT-811, that there are a million of them all over the web, and one can easily be had here:

SONY CAMCORDER REMOTE CONTROL Part Number 147676823 Generic RMT-811

... among other places. Looks like they're even sort of local to you.

There also appears to be one on eBay at the moment:

http://cgi.ebay.com/ws/eBayISAPI.dll...=263602_263622

Allen Campbell · October 4th, 2010, 03:55 PM

Thanks! I did Google DSR PD170 remote but it failed to get what you did. I also eBays searched but not with the Sony number. I could not locate it in the manual.

The ones close to being local? I'm not seeing that one.

Thanks!

Adam Gold · October 4th, 2010, 04:01 PM

I don't know Georgia well but the top link shows them in the same state as you. Not sure how close Thomasville is to where you are.

Allen Campbell · October 4th, 2010, 05:00 PM

Thanks Guys, For Your Patience,

I guess I need to brush up on my Webb page reading, as the Thomasville GA thing was in my face the whole time.

I have a PD170 coming from eBay.

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices Scroll it down a bit.

No remote but it does have a car charger, a must have for a PI and a dime a dozen, and a pelican case, another must have for the PI vehicle and not cheap when new. I hope the hours are real.
The seller says the internal memory battery holds the setting during a battery change and he has a Memory stick coming with it.

I have seen cheaper with more hours and such. But I gotta get this thing and get to shooting.

If you guys would be so kind as to give me the page number in the manual that explains how to make it burn the Date & Time on the tape so it is always shown no matter how it's transferred I would be greatfull. I have been reading the manual and what I found is kind of vague and I need comfirmation from experienced hands shuch as your selves.

Thanks

Adam Gold · October 4th, 2010, 05:09 PM

DATE REC is detailed on Page 63. MENU > OTHERS > DATE REC > ON.

Allen Campbell · October 4th, 2010, 07:33 PM

Thanks. I was confused but I guess the "Superimpose" is the burn in, and the "as data code" is the mode that is only shown on the camera displays or in an analog transfer.

Thanks.

Adam Gold · October 4th, 2010, 07:51 PM

That's exactly right.

Tom Hardwick · October 5th, 2010, 02:49 AM

Quote:

Originally Posted by Allen Campbell

I see. I have an old Sony CCD-TRV52 camcorder that I'll try. Thanks

And it worked perfectly, yes?

tom.

Allen Campbell · October 6th, 2010, 07:29 AM

Quote:

Originally Posted by Tom Hardwick

And it worked perfectly, yes? tom.

The PD170 is on a FedEx truck to arrive Friday. :-). I'll let you know.

October 3rd, 2010, 09:36 PM	#1
Allen Campbell Regular Crew Join Date: Sep 2010 Location: Cartersville GA Posts: 132	I Need A PD170 Remote Control? Whats the chances of me finding a stray PD170 remote control? I cannot post in the classifieds and no moderators will respond. Can anyone tell me whats up with that? __________________ GAPI

October 4th, 2010, 07:41 AM	#3
Allen Campbell Regular Crew Join Date: Sep 2010 Location: Cartersville GA Posts: 132	I see. I have an old Sony CCD-TRV52 camcorder that I'll try. Thanks __________________ GAPI

October 4th, 2010, 01:55 PM	#4
Adam Gold Inner Circle Join Date: Jan 2007 Location: Woodinville, WA USA Posts: 3,467	A quick Internet search reveals that it is called the RMT-811, that there are a million of them all over the web, and one can easily be had here: SONY CAMCORDER REMOTE CONTROL Part Number 147676823 Generic RMT-811 ... among other places. Looks like they're even sort of local to you. There also appears to be one on eBay at the moment: http://cgi.ebay.com/ws/eBayISAPI.dll...=263602_263622 __________________ "It can only be attributable to human error... This sort of thing has cropped up before, and it has always been due to human error."

October 4th, 2010, 03:55 PM	#5
Allen Campbell Regular Crew Join Date: Sep 2010 Location: Cartersville GA Posts: 132	Thanks! I did Google DSR PD170 remote but it failed to get what you did. I also eBays searched but not with the Sony number. I could not locate it in the manual. The ones close to being local? I'm not seeing that one. Thanks! __________________ GAPI

October 4th, 2010, 04:01 PM	#6
Adam Gold Inner Circle Join Date: Jan 2007 Location: Woodinville, WA USA Posts: 3,467	I don't know Georgia well but the top link shows them in the same state as you. Not sure how close Thomasville is to where you are. __________________ "It can only be attributable to human error... This sort of thing has cropped up before, and it has always been due to human error."

October 4th, 2010, 01:06 AM	#2
Tom Hardwick Inner Circle Join Date: Mar 2003 Location: Billericay, England UK Posts: 4,711	As a newbie with only 41 posts under your belt you're probably not considered a regular player yet. If you really want a remote I'd suggest the cheapest way is to borrow the real thing (all Sony camcorders seem to use the same codes, so it doesn't have to be a 170 remote) buy a learning remote and put it face2face with the genuine article and teach it. tom.

October 4th, 2010, 05:00 PM	#7
Allen Campbell Regular Crew Join Date: Sep 2010 Location: Cartersville GA Posts: 132	Thanks Guys, For Your Patience, I guess I need to brush up on my Webb page reading, as the Thomasville GA thing was in my face the whole time. I have a PD170 coming from eBay. eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices Scroll it down a bit. No remote but it does have a car charger, a must have for a PI and a dime a dozen, and a pelican case, another must have for the PI vehicle and not cheap when new. I hope the hours are real. The seller says the internal memory battery holds the setting during a battery change and he has a Memory stick coming with it. I have seen cheaper with more hours and such. But I gotta get this thing and get to shooting. If you guys would be so kind as to give me the page number in the manual that explains how to make it burn the Date & Time on the tape so it is always shown no matter how it's transferred I would be greatfull. I have been reading the manual and what I found is kind of vague and I need comfirmation from experienced hands shuch as your selves. Thanks __________________ GAPI

October 4th, 2010, 05:09 PM	#8
Adam Gold Inner Circle Join Date: Jan 2007 Location: Woodinville, WA USA Posts: 3,467	DATE REC is detailed on Page 63. MENU > OTHERS > DATE REC > ON. __________________ "It can only be attributable to human error... This sort of thing has cropped up before, and it has always been due to human error."

October 4th, 2010, 07:33 PM	#9
Allen Campbell Regular Crew Join Date: Sep 2010 Location: Cartersville GA Posts: 132	Thanks. I was confused but I guess the "Superimpose" is the burn in, and the "as data code" is the mode that is only shown on the camera displays or in an analog transfer. Thanks. __________________ GAPI

October 4th, 2010, 07:51 PM	#10
Adam Gold Inner Circle Join Date: Jan 2007 Location: Woodinville, WA USA Posts: 3,467	That's exactly right. __________________ "It can only be attributable to human error... This sort of thing has cropped up before, and it has always been due to human error."