Outputting to BetaSP at DVinfo.net

Phil Blair · May 4th, 2004, 03:10 AM

In a few days, I'm going to have a commercial I taped on DVCAM output(ed?) to BetaSP. I just wanted to know if there was anything I needed to know, other than to make sure they copy it from a deck that adds setup.

Mike Rehmus · May 4th, 2004, 02:01 PM

Yes, insure that they record the audio at near analog max otherwise your commercial will have a low volume.

Have you checked with the local station/cable operator. Sometimes they will do the transfer for you as Comcast does for me.

May 4th, 2004, 03:10 AM	#1
Phil Blair Tourist Join Date: May 2004 Location: Hendersonville, NC Posts: 4	Outputting to BetaSP In a few days, I'm going to have a commercial I taped on DVCAM output(ed?) to BetaSP. I just wanted to know if there was anything I needed to know, other than to make sure they copy it from a deck that adds setup.

May 4th, 2004, 02:01 PM	#2
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	Yes, insure that they record the audio at near analog max otherwise your commercial will have a low volume. Have you checked with the local station/cable operator. Sometimes they will do the transfer for you as Comcast does for me. __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!