|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 19th, 2003, 05:12 PM
|
#1 |
|
Tourist
Join Date: Jun 2003
Location: SE Missouri, USA
Posts: 2
|
VX2000 and RM-95?
I just got a VX2000 and a RM-95 (the special service remote) but I am having trouble interpreting the data. I don't have the service manual unfortunately, but I have gathered this much info.
6. Record of Use: Page 2, Address A2 to AA Address Function Remarks A2 Drum rotation counted time (BCD code) Minutes A3 Hour (L) 10th, 1st place digit A4 Hour (H) 1000th, 100th place A5 User initial power on date (BCD code) Year After setting the clock, power on date is set(?) A6 Month A7 Day I'm having trouble translating the numbers I have into actual time. Here is what I got: A2 = 42 A3 = 54 A4 = 0 A5 = 00 A6 = 05 A7 = 01 So from this data am I right in saying that the camera has 54 hours and 42 minutes on the heads, and was powered up on May 1st 2000? Anybody out there read this differently? Looks almost like Algebra! :-) |
|
|
|
June 19th, 2003, 06:21 PM
|
#2 |
|
Tourist
Join Date: Jun 2003
Location: SE Missouri, USA
Posts: 2
|
Now that I think about it, maybe it means 5hrs 42 minutes...
Hmmm... |
|
|
|
|
June 19th, 2003, 06:54 PM
|
#3 |
|
Wrangler
Join Date: May 2002
Location: Vallejo, California
Posts: 4,049
|
I don't have time to get back into Binary Coded Decimal but here's a web site that should help:
http://www.danbbs.dk/~erikoest/bcd.htm
__________________
Mike Rehmus Hey, I can see the carrot at the end of the tunnel! |
|
|
|
|
| ||||||
|
||||||
|
|
