|
|||||||||
|
Thread Tools | Search this Thread |
October 3rd, 2011, 08:30 AM | #1 |
Inner Circle
Join Date: Aug 2006
Location: Poland
Posts: 4,086
|
a trivial problem:)
I've left my Heliopan VND filter on one of my lenses for a couple of days, with a Marumi step-up ring. And now I cannot screw the Heliopan off the ring - only the latter will turn, in the lens' thread!
I was hoping for some better materials in both (Marumi is Made in Japan, while Heliopan - in Germany); never occurred to me they might stick like that. Arghh.... I'll apply some grease to all my step-up rings' threads, but please advise on some DIY methods of detaching the two :)
__________________
Sony PXW-FS7 | DaVinci Resolve Studio; Magix Vegas Pro; i7-5960X CPU; 64 GB RAM; 2x GTX 1080 8GB GPU; Decklink 4K Extreme 12G; 4x 3TB WD Black in RAID 0; 1TB M.2 NVMe cache drive |
October 4th, 2011, 07:26 AM | #2 |
Inner Circle
Join Date: Aug 2006
Location: Poland
Posts: 4,086
|
Re: a trivial problem:)
OK, problem solved. I just put the stuck filter/ring on a flat piece of foam material (the step-up ring facing down), pressed down firmly, and turned the Heliopan filter - it let go!
Before attaching it to any of the lens/step-up rings for a longer time again, I'm going to apply some of the natural "grease" from my own nostrils to their threads... Have heard somewhere it's the least corrosion-prone way - is it true?
__________________
Sony PXW-FS7 | DaVinci Resolve Studio; Magix Vegas Pro; i7-5960X CPU; 64 GB RAM; 2x GTX 1080 8GB GPU; Decklink 4K Extreme 12G; 4x 3TB WD Black in RAID 0; 1TB M.2 NVMe cache drive |
October 4th, 2011, 10:47 AM | #3 |
Major Player
Join Date: Jan 2010
Location: Nieuw-Vossemeer, The Netherlands
Posts: 455
|
Re: a trivial problem:)
be carefull with grease. It may collect dust and sand and make problems worse.
Solutions: 1) instead of using more force, just very, very gently hold the filter between two fingertips and start turning. It is often because of the pressure one puts on the filter, that the shape becomes slightly less round, resulting in blockage. 2) there are those special grips, to keep good hold on a filter and deviding pressure equily around the circle, when using more force. 3) Put the lens/filter etc. in a well closed locked plastic bag en keep the filter and ring under warm flowing water. Hopefully the step-up the ring will expand a bit faster (because of the increase in tempereture) than the filter and the thing comes loose. Last edited by Cees van Kempen; October 4th, 2011 at 10:48 AM. Reason: typing error |
October 6th, 2011, 08:16 AM | #4 | |
Trustee
Join Date: Aug 2005
Location: Berkshire, UK
Posts: 1,562
|
Re: a trivial problem:)
Quote:
Grosses some people out, but it works for me.
__________________
Director/Editor - MDMA Ltd: Write, Shoot, Edit, Publish - mattdavis.pro EX1 x2, C100 --> FCPX & PPro6 |
|
| ||||||
|
|