Help Please! Editing nxcam footage in Sony Vegas 10 at DVinfo.net

Armando Irias · May 10th, 2011, 05:46 PM

I have been importing footage from my Sony NX5U into Sony Vegas 10 for editing but I am facing a problem in the timeline. The video freezes at the end and the beginning of each clip placed in the timeline. The problem gets worse when I add transitions and/or filters to the clips. The video was recorded with the following specs: Video: 00:00:14.473, 23.976 fps progressive, 1920x1080x12, AVC
Audio: 00:00:14.514, 48,000 Hz, Stereo, Dolby AC-3

My project is also set the same specs.
It also seems weird that I have done tests with footage shot with a Sony camcorder HDR-SR10 with the following specs: Video: 00:00:34.535, 29.970 fps interlaced, 1440x1080x12, AVC
Audio 1: 00:00:34.535, 48,000 Hz, 5.1 Surround (stereo downmix), Dolby AC-3
Audio 2: 00:00:34.535, 48,000 Hz, 5.1 Surround, Dolby AC-3
The video in this case runs just fine within the timeline with no freeze frames.

I do my editing on a Toshiba 18.4" laptop running an i7processor Quad Core, 4GB Ram, 1Gb NVidia Video Card
Please somebody help will be appreciated because at this point I have no clue what can be wrong since Sony Vegas is supposed to be editing AVCHD natively. Also, a coworker has the exact same computer doing editing in Sony Vegas 10 and the video from the NXCAM runs just fine in the timeline.
Thanks,

Dipesh Parmar · May 18th, 2011, 06:08 PM

Firsty, Let Talk about how you are inporting the Video Files please? are you using the Sony Contect Manager to join the NXCAM Files as One, and then importing them or are you drag and dropping from the camera in the Sony App?

May 10th, 2011, 05:46 PM	#1
Armando Irias New Boot Join Date: May 2010 Location: Managua, Nicaragua Posts: 16	Help Please! Editing nxcam footage in Sony Vegas 10 I have been importing footage from my Sony NX5U into Sony Vegas 10 for editing but I am facing a problem in the timeline. The video freezes at the end and the beginning of each clip placed in the timeline. The problem gets worse when I add transitions and/or filters to the clips. The video was recorded with the following specs: Video: 00:00:14.473, 23.976 fps progressive, 1920x1080x12, AVC Audio: 00:00:14.514, 48,000 Hz, Stereo, Dolby AC-3 My project is also set the same specs. It also seems weird that I have done tests with footage shot with a Sony camcorder HDR-SR10 with the following specs: Video: 00:00:34.535, 29.970 fps interlaced, 1440x1080x12, AVC Audio 1: 00:00:34.535, 48,000 Hz, 5.1 Surround (stereo downmix), Dolby AC-3 Audio 2: 00:00:34.535, 48,000 Hz, 5.1 Surround, Dolby AC-3 The video in this case runs just fine within the timeline with no freeze frames. I do my editing on a Toshiba 18.4" laptop running an i7processor Quad Core, 4GB Ram, 1Gb NVidia Video Card Please somebody help will be appreciated because at this point I have no clue what can be wrong since Sony Vegas is supposed to be editing AVCHD natively. Also, a coworker has the exact same computer doing editing in Sony Vegas 10 and the video from the NXCAM runs just fine in the timeline. Thanks,

May 18th, 2011, 06:08 PM	#2
Dipesh Parmar Regular Crew Join Date: Apr 2011 Location: Brisbane, Australia, Queesland Posts: 33	Re: Help Please! Editing nxcam footage in Sony Vegas 10 Firsty, Let Talk about how you are inporting the Video Files please? are you using the Sony Contect Manager to join the NXCAM Files as One, and then importing them or are you drag and dropping from the camera in the Sony App?