|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
December 18th, 2010, 03:41 PM
|
#1 |
|
Regular Crew
Join Date: Feb 2009
Location: Gold Coast, Australia
Posts: 33
|
Problem - can't film, blacked out
Was filming a wedding and everything was fine with my Sony Z7. Turning the camera on a short time later (without changing any settings), I am now not getting a record signal from the camera.
When I pull out the screen it is completely black and the Iris info value has lines instead of numbers. I did get a condensation error and it told me to turn the camera off for an hour. I let it sit overnight and the problem still exists. I turned it into record mode and the screen is still black. I put a tape in and it won't record either. Any thoughts would be greatly appreciated.
__________________
www.motionart.com.au |
|
|
|
December 18th, 2010, 03:58 PM
|
#2 |
|
New Boot
Join Date: Aug 2010
Location: Ottawa
Posts: 5
|
Have you tried the reset button?
|
|
|
|
|
December 18th, 2010, 05:37 PM
|
#3 |
|
Regular Crew
Join Date: Jan 2009
Location: CA USA
Posts: 74
|
Hi Geoff, I only recently got my Z7 back from Sony for the same problem with the iris info as lines and not allowing me to record, I however did not get the Condensation error.
It turned out to be my Lens? Sony fixed her and now all is fine. Hope this helped you. James |
|
|
|
|
January 3rd, 2011, 10:31 PM
|
#4 |
|
Regular Crew
Join Date: Feb 2009
Location: Gold Coast, Australia
Posts: 33
|
I did try the reset button and cleaned the contacts on the lens, but I am still getting lines through the Iris info area and have no control over zooming / focusing.
__________________
www.motionart.com.au |
|
|
|
|
| ||||||
|
||||||
|
|
