|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 16th, 2013, 05:42 PM
|
#1 |
|
New Boot
Join Date: May 2013
Location: Scotland
Posts: 5
|
Sony HVR V1E Battery Problems
I have a Sony HVR V1E which has had limited use over three years. I think the internal cmos battery is exhausted, now when I attach the camera batteries, it will intermitently fail to read them, either saying the battery is flat or the battery connected is not an Info Lithium battery. Disconnecting the battery for a few momrents sometimes works but not always.
Any suggestions? |
|
|
|
May 16th, 2013, 10:48 PM
|
#2 |
|
Inner Circle
Join Date: Jan 2007
Location: Woodinville, WA USA
Posts: 3,467
|
Re: Sony HVR V1E Battery Problems
Sounds like a trip to the shop is in order.
__________________
"It can only be attributable to human error... This sort of thing has cropped up before, and it has always been due to human error." |
|
|
|
|
May 20th, 2013, 07:52 PM
|
#3 |
|
Regular Crew
Join Date: Dec 2011
Location: Newbury Park CA
Posts: 53
|
Re: Sony HVR V1E Battery Problems
This does not have anything to do with the internal clock battery. The problem is normally a problem with the battery contacts or a problem on the main board. I would try a new Sony battery or known good Sony battery first. Generic batteries don't always work. There is an IC in the battery that communicates with the camcorder and we have seen problems with a lot of the non Sony batteries.
Good Luck!!! |
|
|
|
|
| ||||||
|
||||||
|
|
