A1 over FX-1 (or HC1)?

Graham Hickling · February 1st, 2006, 01:13 PM

You can certainly record to that 7200rpm drive ... but it has to be via a computer!

You'll need to have a software application running - even if it's a tiny freeware one like CapDVHS - to facilitate the transfer.

Stu Holmes · February 1st, 2006, 04:36 PM

Quote:

Originally Posted by Tom Hardwick

touch screen menu - it takes about 8 menu prods simply to turn the Steadyshot on and off.

just add the Steadyshot menu button to Pge 1 of your P-MENU and it's right there. Read the manual and put your most commonly used control on Page1 of your *customised* on-screen menu.

Quote:

Originally Posted by Tom Hardwick

No readout of aperture or shutter speed you're shooting at, or how much gain up is being applied. For anyone who came from the TRV900, this is unacceptable. OK on the HC1, but the professional A1?

Aperture, yep ok. But i'm fairly sure that if you fix shutter speed, then it is displayed, while recording, in bottom left or bottom right.

regards

February 1st, 2006, 01:13 PM	#16
Graham Hickling Trustee Join Date: May 2004 Location: Knoxville, Tennessee Posts: 1,669	You can certainly record to that 7200rpm drive ... but it has to be via a computer! You'll need to have a software application running - even if it's a tiny freeware one like CapDVHS - to facilitate the transfer.