|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 10th, 2013, 03:58 PM
|
#1 |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
PMW-320 and Cine4
I have the PMW-320 and somehow managed to have Cine4 in my SF settings.
I am trying to use the same settings on my friends 320 as well but dont remember how i got the Cine4 setting :) Any ideas and thanks in advance. |
|
|
|
June 16th, 2013, 04:14 AM
|
#2 |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
Re: PMW-320 and Cine4
Anyone any idea :)
|
|
|
|
|
June 16th, 2013, 07:15 AM
|
#3 |
|
Vortex Media
Join Date: Jan 2009
Location: Florida
Posts: 3,440
|
Re: PMW-320 and Cine4
Cine 4 is one of the gamma options in the picture profile menus of the camera. Is that what you are asking about?
BTW, if you really want to match two cameras, save your PP to a card and then load it on your friend's camera so you can be sure that ALL the settings are the same -- not just the gamma mode. MASTERING THE SONY PMW-EX3
__________________
Vortex Media http://www.vortexmedia.com/ Sony FS7, F55, and XDCAM training videos, field guides, and other production tools |
|
|
|
|
June 16th, 2013, 03:01 PM
|
#4 | |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
Re: PMW-320 and Cine4
Quote:
Yes, I looked at saving it to card but wasn't sure how to go about it, ....even after reading the manual :) Thank you Doug. |
|
|
|
|
|
June 17th, 2013, 06:31 AM
|
#5 |
|
Inner Circle
Join Date: Dec 2005
Location: Bracknell, Berkshire, UK
Posts: 4,957
|
Re: PMW-320 and Cine4
In the "Others" page of the menu, and "Camera Data"
Saves a snapshot of the cameras setup, including assignable buttons, clip naming and picture profiles to the SxS (SD) card.
__________________
Alister Chapman, Film-Maker/Stormchaser http://www.xdcam-user.com/alisters-blog/ My XDCAM site and blog. http://www.hurricane-rig.com |
|
|
|
|
June 17th, 2013, 07:42 AM
|
#6 |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
Re: PMW-320 and Cine4
Thank you Alister.
|
|
|
|
|
June 17th, 2013, 04:22 PM
|
#7 |
|
Vortex Media
Join Date: Jan 2009
Location: Florida
Posts: 3,440
|
Re: PMW-320 and Cine4
Just a word of warning. Only use the Camera Data file method if you wish to entirely clone your camera. Your friend may not appreciate you changing nearly every setting on his camera, including zebras, peaking, assign buttons, etc. I'd be pretty pissed off if you loaded a Camera Data file into my camera.
If you only want to give him your picture profile settings, and leave everything else on the other camera alone, then use the PP Data menu instead.
__________________
Vortex Media http://www.vortexmedia.com/ Sony FS7, F55, and XDCAM training videos, field guides, and other production tools |
|
|
|
|
June 17th, 2013, 04:28 PM
|
#8 |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
Re: PMW-320 and Cine4
OK Doug, good point. Thanks
|
|
|
|
|
June 18th, 2013, 07:14 PM
|
#9 |
|
Inner Circle
Join Date: Dec 2005
Location: Bracknell, Berkshire, UK
Posts: 4,957
|
Re: PMW-320 and Cine4
Duh...my mistake...... It's a PMW-320, not EX1/EX3, the scene files are saved under the File menu using either "all file" which saves everything (with Doug's caveat above) or scene file to just save/recall the scene files.
__________________
Alister Chapman, Film-Maker/Stormchaser http://www.xdcam-user.com/alisters-blog/ My XDCAM site and blog. http://www.hurricane-rig.com |
|
|
|
|
June 19th, 2013, 02:36 AM
|
#10 | |
|
Trustee
Join Date: Oct 2008
Location: Northern Ireland
Posts: 1,080
|
Re: PMW-320 and Cine4
Quote:
|
|
|
|
|
|
| ||||||
|
||||||
|
|
