F350 And Letus Extreme

Valeri Odikadze · December 22nd, 2007, 12:23 AM

Hello, I also own PDW350+HD Canon x20 lens. I'd like to achieve gilm-style. If I use Letus & mount extra 'cine' lens, it will add DOF but not picture quality, because camea's own Canon HD lens is in work. Can you tell me what lens series must I mount to not to decrease a quality of Cano HD lens. thank you. valeri.

Valeri Odikadze · December 22nd, 2007, 12:25 AM

Another question is can Letus be attached directly to the PDW350? To not through Canon
HD x20 lens. Thank you. Valeri

Phil Bloom · December 22nd, 2007, 08:09 PM

there will soon be a relay available from letus that bypasses your lens

Valeri Odikadze · December 25th, 2007, 05:48 AM

Hello Phil!

How is going with shooting with your PDW-F350+ letus? Are you happy with a footage filmlook? Thanks. Valeri.

Phil Bloom · December 25th, 2007, 05:53 AM

Not shot anything with it yet. Am waiting for the Letus B3 relay. Just using the ex1 with the letus at the mo

Bob Hart · December 25th, 2007, 09:48 PM

If they get this thing up and improve the resolution that fraction more, there is one more step they might take, PL mount to Letus35 via the same direct relay optics, AKA groundglass to Super16mm motion picture film via an AATON or ARRI SR3.

Anything to extend the working life of 16mm can't be a bad thing can it? Don't do a Rodriguez on me and tell me film is dead and I should get over it and dance on its grave now will you.

I hear now the cries of "What in the hell for?" Answer "For no other reason that it's there to be done with not too much more effort other than to set up the flange distances and machine the PL mount.

Kakhaber Mshvidobadze · September 24th, 2008, 04:10 AM

Hi guys.. what about ultimate and F350? does anybody have examples? :)

December 22nd, 2007, 12:23 AM	#16
Valeri Odikadze New Boot Join Date: Jul 2007 Location: Tbilisi Georgia Posts: 5	lens for 350+xtreme+its_own_canonx20 Hello, I also own PDW350+HD Canon x20 lens. I'd like to achieve gilm-style. If I use Letus & mount extra 'cine' lens, it will add DOF but not picture quality, because camea's own Canon HD lens is in work. Can you tell me what lens series must I mount to not to decrease a quality of Cano HD lens. thank you. valeri. __________________ Videographer

December 22nd, 2007, 12:25 AM	#17
Valeri Odikadze New Boot Join Date: Jul 2007 Location: Tbilisi Georgia Posts: 5	Another question is can Letus be attached directly to the PDW350? To not through Canon HD x20 lens. Thank you. Valeri __________________ Videographer

December 22nd, 2007, 08:09 PM	#18
Phil Bloom Trustee Join Date: Aug 2006 Location: London UK Posts: 1,939	there will soon be a relay available from letus that bypasses your lens __________________ Philip Bloom Cinematographer, Director, Filmmaker www.philipbloom.net

December 25th, 2007, 05:48 AM	#19
Valeri Odikadze New Boot Join Date: Jul 2007 Location: Tbilisi Georgia Posts: 5	Pdw-f350 Hello Phil! How is going with shooting with your PDW-F350+ letus? Are you happy with a footage filmlook? Thanks. Valeri. __________________ Videographer

December 25th, 2007, 05:53 AM	#20
Phil Bloom Trustee Join Date: Aug 2006 Location: London UK Posts: 1,939	Not shot anything with it yet. Am waiting for the Letus B3 relay. Just using the ex1 with the letus at the mo __________________ Philip Bloom Cinematographer, Director, Filmmaker www.philipbloom.net

December 25th, 2007, 09:48 PM	#21
Bob Hart Inner Circle Join Date: Dec 2003 Location: PERTH. W.A. AUSTRALIA. Posts: 4,477	If they get this thing up and improve the resolution that fraction more, there is one more step they might take, PL mount to Letus35 via the same direct relay optics, AKA groundglass to Super16mm motion picture film via an AATON or ARRI SR3. Anything to extend the working life of 16mm can't be a bad thing can it? Don't do a Rodriguez on me and tell me film is dead and I should get over it and dance on its grave now will you. I hear now the cries of "What in the hell for?" Answer "For no other reason that it's there to be done with not too much more effort other than to set up the flange distances and machine the PL mount. Last edited by Bob Hart; December 25th, 2007 at 09:49 PM. Reason: errors

September 24th, 2008, 04:10 AM	#22
Kakhaber Mshvidobadze New Boot Join Date: Jan 2008 Location: Tbilisi, Georgia Posts: 21	Hi guys.. what about ultimate and F350? does anybody have examples? :)