Gabriel trailer at DVinfo.net

Tunde Anjorin · August 13th, 2007, 09:45 PM

Just spreading the words guys.... The guy who directed this film is an Asussie named Shane Abbess. He shot it with 2 JVC's GY-HD101E…. the movie has been picked up by Sony for theatrical distribution…. Goggle his name for more info.

Just wanted to share with you guys. This gives the JVC hdv cam some serious bragging rights…. Below is a link to download the trailer, and the official site.

http://au.media.movies.ign.com/media...79/vids_1.html

http://www.gabrielmovie.com/

Gabriel Yeager · August 13th, 2007, 09:48 PM

So do I get a free admission since it is my name? hahaha.

~Gabriel

Brian Duke · August 13th, 2007, 11:58 PM

Did they use a 35mm adapter, and if so, which one?

Glenn Krawczyk · August 14th, 2007, 12:19 AM

Quote:

Originally Posted by Brian Duke

Did they use a 35mm adapter, and if so, which one?

Hi Brian,

I met Shane Abbess and his DOP at Australia's equivalent of NAB a few weeks back. They were screening the trailer for Gabriel (on a fairly small screen) and it looked fantastic. I had a chat with them afterwards and they told me the whole film was shot on stock GY-101E cameras with the standard 16x Fujinon lens at 25FPS, then laser printed to 35mm film at 24FPS with the 4% speed reduction that process produces.

Cheers
Glenn

Maheel Perera · August 14th, 2007, 10:32 AM

I wrote to Peter Holland who was thw DOP of Gabriel and he was amazingly nice and quite willing to give information regarding the shoot. If anyone has more questions I will pass them on to him.

"i'll answer all your questions, but i've pasted my setup specs. remembering that the whole film was set at night so i never tested for daylight/high key scenarios. please feel free to check these out.

back focus was somthing to be vigilant about. we would check it 4 or 5 times a day, especially if you had just shot with the macro end of the lens and anytime the camera crew had 5 minutes. i found the best method would be to open up aperture as much as possible (i use ND filters in mattbox, i don't trust the in camera ones, you can't check them for dirt, grease and i've seen them affect focus) look for a bright pinpoint a the horizon, move back ring till sharp. now zoom all the way back and check sharps with back ring again, repeat till you are satisfied that both ends of lens are sharp.

good luck

anything else please feel free to contact me.

peter a.holland
cinematographer
www.showreelfinder.com/peter a.holland

Camera Specs

1.CAMERA

Frame Rate : 50/25
REC: HDV-HD25P
Aspect : 16:9
HDV PB Output: NATIVE
PB TAPE: auto
OUTPUT TERMINAL : COMPOSITE

2.CAMERA OPERATION:

AE:V-2
ALC MAX : 18db
PRESET TEMP
SMOOTH TRANS: OFF

3.CAMERA PROCESS:

MASTER BLACK: 1
DETAIL: OFF
BLACK: NORMAL
WHITE CLIP: 108%
KNEE: MANUAL
LEVEL:100%
MOTION SMOOTH: OFF

4.ADVANCE PROCESS:

CINELIKE PROCESS: ON
COLOR MATRIX: CINE
GAMMA: CINE
LEVEL: 2
COLOR GAIN: NORMAL

5.SKIN COLOUR ADJUST

SKIN COLOUR DET: STOP
SKIN COLOUR RANGE: NORMAL

6.LCD/VF

ZEBRA: OVER 100%
F.NO/IRIS: OFF
FILTER: OFF
SAFETY ZONE: OFF
FOCUS ASSIST: BLUE
VIDEO FORMAT: ON
TAPE FORMAT: ON
TC/UB: ON
AUDIO:ON
LCD CONTRACT: NORMAL
VF CONTRAST: NORMAL

The quality of the Anamorphic transfer?

the transfer was amazing but i think it was partly due to warren lynch at intercolour in sydney. he did something magical. he converted all files to log space which made a big difference. you might try contacting him.

The problems encountered during the production?

see previous back focus."

Gabriel Yeager · August 14th, 2007, 11:17 AM

Wow, that is really cool Maheel!

So what were they budgeted for on this film?

~Gabriel

Paolo Ciccone · August 14th, 2007, 12:55 PM

Very nice, glad to see something that looks that good and that has been shot with the stock HD100.

Also glad that the backfocus issue has been brought up. I recently covered that in a video tutorial for "2nd Unit" which was, in fact, shot and demoed with the HD100: http://www.paolociccone.com

Steven Thomas · August 16th, 2007, 08:34 AM

Excellent work. It goes to show what can be done in the right hands.

I'd be interested in hearing more on this.

Maheel Perera · August 17th, 2007, 08:52 AM

This is a new trailer.

http://www.youtube.com/watch?v=rA9hjGs7VKM

Film was shot 16:9 with no markings for the 2.35:1 aspect ratio and pan & scan in post for the anamorphic AR.

PJ Gallagher · August 21st, 2007, 02:24 AM

Just saw the Gabriel trailer on the big screen here in Australia. It was at the front of the New Zealand horror/comedy "Black Sheep".

The trailer looks awesome, the lighting looks fantastic. The only slight criticism would be that the image overall looked a little soft. It was hard to make a definitive judgement on this, though, as the trailer is cut so fast it's hard to analyze a shot for a decent length of time.

But, man, I'm really excited to check this one out.

Cheers.

Noa Put · August 21st, 2007, 02:49 AM

Allthough it looks very impressive the problem with trailers is that they cut so fast, using dissolves in such a way that you hardly can see what is going on.

August 13th, 2007, 09:45 PM	#1
Tunde Anjorin Regular Crew Join Date: Apr 2006 Location: atlanta ga Posts: 52	Gabriel trailer Just spreading the words guys.... The guy who directed this film is an Asussie named Shane Abbess. He shot it with 2 JVC's GY-HD101E…. the movie has been picked up by Sony for theatrical distribution…. Goggle his name for more info. Just wanted to share with you guys. This gives the JVC hdv cam some serious bragging rights…. Below is a link to download the trailer, and the official site. http://au.media.movies.ign.com/media...79/vids_1.html http://www.gabrielmovie.com/

August 13th, 2007, 09:48 PM	#2
Gabriel Yeager Major Player Join Date: Jul 2006 Location: Washington, NorthWest USA Posts: 788	So do I get a free admission since it is my name? hahaha. ~Gabriel __________________ Gabriel Photography

August 13th, 2007, 11:58 PM	#3
Brian Duke Major Player Join Date: Oct 2005 Location: Hollywood, California Posts: 899	Did they use a 35mm adapter, and if so, which one? __________________ Visit me and my work at www.artofduke.com

August 14th, 2007, 10:32 AM	#5
Maheel Perera Regular Crew Join Date: Sep 2003 Location: Sri Lanka Posts: 128	Gabriel I wrote to Peter Holland who was thw DOP of Gabriel and he was amazingly nice and quite willing to give information regarding the shoot. If anyone has more questions I will pass them on to him. "i'll answer all your questions, but i've pasted my setup specs. remembering that the whole film was set at night so i never tested for daylight/high key scenarios. please feel free to check these out. back focus was somthing to be vigilant about. we would check it 4 or 5 times a day, especially if you had just shot with the macro end of the lens and anytime the camera crew had 5 minutes. i found the best method would be to open up aperture as much as possible (i use ND filters in mattbox, i don't trust the in camera ones, you can't check them for dirt, grease and i've seen them affect focus) look for a bright pinpoint a the horizon, move back ring till sharp. now zoom all the way back and check sharps with back ring again, repeat till you are satisfied that both ends of lens are sharp. good luck anything else please feel free to contact me. peter a.holland cinematographer www.showreelfinder.com/peter a.holland Camera Specs 1.CAMERA Frame Rate : 50/25 REC: HDV-HD25P Aspect : 16:9 HDV PB Output: NATIVE PB TAPE: auto OUTPUT TERMINAL : COMPOSITE 2.CAMERA OPERATION: AE:V-2 ALC MAX : 18db PRESET TEMP SMOOTH TRANS: OFF 3.CAMERA PROCESS: MASTER BLACK: 1 DETAIL: OFF BLACK: NORMAL WHITE CLIP: 108% KNEE: MANUAL LEVEL:100% MOTION SMOOTH: OFF 4.ADVANCE PROCESS: CINELIKE PROCESS: ON COLOR MATRIX: CINE GAMMA: CINE LEVEL: 2 COLOR GAIN: NORMAL 5.SKIN COLOUR ADJUST SKIN COLOUR DET: STOP SKIN COLOUR RANGE: NORMAL 6.LCD/VF ZEBRA: OVER 100% F.NO/IRIS: OFF FILTER: OFF SAFETY ZONE: OFF FOCUS ASSIST: BLUE VIDEO FORMAT: ON TAPE FORMAT: ON TC/UB: ON AUDIO:ON LCD CONTRACT: NORMAL VF CONTRAST: NORMAL The quality of the Anamorphic transfer? the transfer was amazing but i think it was partly due to warren lynch at intercolour in sydney. he did something magical. he converted all files to log space which made a big difference. you might try contacting him. The problems encountered during the production? see previous back focus." __________________ Maheel Perera www.dcinemanetworks.com

August 14th, 2007, 11:17 AM	#6
Gabriel Yeager Major Player Join Date: Jul 2006 Location: Washington, NorthWest USA Posts: 788	Wow, that is really cool Maheel! So what were they budgeted for on this film? ~Gabriel __________________ Gabriel Photography

August 14th, 2007, 12:55 PM	#7
Paolo Ciccone Trustee Join Date: Apr 2005 Location: Santa Cruz, CA Posts: 1,116	Very nice, glad to see something that looks that good and that has been shot with the stock HD100. Also glad that the backfocus issue has been brought up. I recently covered that in a video tutorial for "2nd Unit" which was, in fact, shot and demoed with the HD100: http://www.paolociccone.com __________________ Paolo http://www.paolociccone.com Demo Reel

August 16th, 2007, 08:34 AM	#8
Steven Thomas Trustee Join Date: Sep 2005 Location: Gilbert, AZ Posts: 1,896	Excellent work. It goes to show what can be done in the right hands. I'd be interested in hearing more on this.

August 17th, 2007, 08:52 AM	#9
Maheel Perera Regular Crew Join Date: Sep 2003 Location: Sri Lanka Posts: 128	This is a new trailer. http://www.youtube.com/watch?v=rA9hjGs7VKM Film was shot 16:9 with no markings for the 2.35:1 aspect ratio and pan & scan in post for the anamorphic AR. __________________ Maheel Perera www.dcinemanetworks.com

August 21st, 2007, 02:24 AM	#10
PJ Gallagher Regular Crew Join Date: Oct 2006 Location: Canberra, Australia Posts: 78	Just saw the Gabriel trailer on the big screen here in Australia. It was at the front of the New Zealand horror/comedy "Black Sheep". The trailer looks awesome, the lighting looks fantastic. The only slight criticism would be that the image overall looked a little soft. It was hard to make a definitive judgement on this, though, as the trailer is cut so fast it's hard to analyze a shot for a decent length of time. But, man, I'm really excited to check this one out. Cheers.

August 21st, 2007, 02:49 AM	#11
Noa Put Inner Circle Join Date: Jun 2007 Location: Belgium Posts: 9,510	Allthough it looks very impressive the problem with trailers is that they cut so fast, using dissolves in such a way that you hardly can see what is going on.