Private Classifieds listings from 2008

Russell Feller · September 2nd, 2008, 09:28 AM

Email Sent got a guy that will take them for $400 if interested.

Russell Feller · September 2nd, 2008, 09:34 AM

Rycote mini wind jammer. Meant for Canon XL series cameras.

$45TYD

Joe Winchester · September 2nd, 2008, 10:15 AM

Please disregard this thread. I am parting everything out in a new thread.

Thanks,

-J

Joe Winchester · September 2nd, 2008, 10:27 AM

I have a great XL-2 setup that I am going to piece out in order to sell. This camera has worked flawlessly. Never had any issues with dropouts or mechanical problems, dead pixels, etc. Heads regularly cleaned. ONLY Sony premium tapes have been used in this camera. Fantastic camera, great colors, sharp.

For sale:

--- Canon XL2 with 20x lens, battery, strap, remote, sunshade, lens/body caps, users manual. $2000
*There was some rubbing on the viewfinder and on the aperture control 'nub' from the Storm Case foam I kept the camera in. This caused the rubber coating to peel off on the front of the finder. It is purely cosmetic. See photo #3.

--- Chrosziel 4x4 matte box, lightweight support rails, follow focus, rotating filter holder, 4x4 glass Tiffen circular polarizer in soft case, 72-85mm step-up ring, 72mm UV filter, 16x9 matte, french flags, plate for XL2 (plates for mounting other cameras to the matte box can be purchased from 16x9 inc). $1600

--- Canon 16x manual servo lens. Clean, perfect glass. $800

Here's a shot of the above items all setup together (minus the dual battery holder and tripod of course). I will sell all of the above as a package for $4100

Also for sale:

--- EWA Marine soft housing for Canon XL1 (XL2 *could* fit if you remove the shoulder support, although I haven't tried it). Included: soft case, 2lb divers weight, weight holder, desiccant, various step-up rings $350
*I only used this thing twice. Both times it was properly washed and dried. No leaks or tears present.

Pickup in Austin, TX is preferred (or I'll meet you within a reasonable distance), but I will ship. Buyer pays actual shipping and insurance. Your choice of shipping methods (UPS, Fedex, etc). I prefer cash or cashiers check. Any personal checks will have to clear before shipping.

Please email me or post here with any questions. Thanks!

-Joseph Winchester

Brian Standing · September 2nd, 2008, 11:28 AM

I think I have found another solution, so I am no longer in the market for this deck.

Thanks to all who responded.

David Beisner · September 2nd, 2008, 01:27 PM

E-mail sent re: the camera...

Jack Tran · September 2nd, 2008, 03:07 PM

intrested in glidecam, email sent

Jack Tran · September 2nd, 2008, 03:12 PM

also intrested in the wide if it fits on an canon hv30. also, do you know if the XH A1 lens hood fit on that lens?

Edit: payment sent on glidecam. not intrested in the wide anymore.

Amos Kim · September 2nd, 2008, 06:20 PM

bump... I use this unit to feed my 720p 24fps hdv tapes into my nle. 850? anyone?

Alex Raskin · September 2nd, 2008, 09:46 PM

Price just reduced to $899 plus shipping. (or pick up and save on shipping.)

Offers welcome.

If this video capture PC does not sell by Sep 8th, I'm disassembling it and selling parts separately.

Jaadgy Akanni · September 2nd, 2008, 10:29 PM

bumpiddy bump

Julian Frost · September 2nd, 2008, 11:58 PM

Quote:

Originally Posted by Jaadgy Akanni

I've gotta confess I don't know how to attach an image on here. Can anyone gimme step by step instructions? I'd appreciate it; I'm not that bright :-)

To attach an image, use the followign HTML code:

HTML Code:

[img]http://www.my-web-site.com/MyImage.jpg[/img]

Matt OBrien · September 3rd, 2008, 12:44 AM

sold, thanks

Michael Nistler · September 3rd, 2008, 01:14 AM

Hi all,

I wanted to let everyone my pleasure with Dave Uriate's service associated with the sale of his teleprompter. He offered superb support through all phases of the sale (presale questions and negotiation, packaging/shipping, billing, and post-sales support).

Thank you Dave for the great gear and fantastic service - highly recommended!

Warm Regards, Michael

Mike Marriage · September 3rd, 2008, 02:57 AM

I'm upgrading to a larger rig so I'm selling the V25.

It's been a brilliant system and very flexible - you can basically fly any video or S16 camera on it. I haven't tried but it should handle a Red One without too many tons of accessories.

The sled and arm come in a large Storm flight case.

I can also supply a perfect C-stand for £85 and 4 Sony V-Locks for £80 each with the rig. The batteries are in great shape, one powered the rig all day yesterday on a 12 hour shoot with a lot of Steadicam.

The rig is in near perfect condition. There are a few tiny scuff marks around the gimbal from docking. Operationally it is like new.

I am about to VAT register, so if it is bought after I do, I'll be looking for £4500 GBP plus VAT @17.5%. If I am selling outside the UK VAT may not need to be added.

Call me on 07773 179773 for more info/pictures or email: mmarriage@orange.net

Rig is in the UK near London (Chelmsford) and I will ship worldwide if the buyer pays.

September 2nd, 2008, 09:34 AM	#4172
Russell Feller Regular Crew Join Date: Sep 2007 Location: Cedar Falls, IA Posts: 85	Rycote wind jammer Rycote mini wind jammer. Meant for Canon XL series cameras. $45TYD

September 2nd, 2008, 10:27 AM	#4174
Joe Winchester Regular Crew Join Date: Jan 2005 Location: Austin, TX Posts: 125	Canon XL2, Chrosziel, 16x, etc for sale Austin, TX I have a great XL-2 setup that I am going to piece out in order to sell. This camera has worked flawlessly. Never had any issues with dropouts or mechanical problems, dead pixels, etc. Heads regularly cleaned. ONLY Sony premium tapes have been used in this camera. Fantastic camera, great colors, sharp. For sale: --- Canon XL2 with 20x lens, battery, strap, remote, sunshade, lens/body caps, users manual. $2000 There was some rubbing on the viewfinder and on the aperture control 'nub' from the Storm Case foam I kept the camera in. This caused the rubber coating to peel off on the front of the finder. It is purely cosmetic. See photo #3. --- Chrosziel 4x4 matte box, lightweight support rails, follow focus, rotating filter holder, 4x4 glass Tiffen circular polarizer in soft case, 72-85mm step-up ring, 72mm UV filter, 16x9 matte, french flags, plate for XL2 (plates for mounting other cameras to the matte box can be purchased from 16x9 inc). $1600* --- Canon 16x manual servo lens. Clean, perfect glass. $800 Here's a shot of the above items all setup together (minus the dual battery holder and tripod of course). I will sell all of the above as a package for $4100 Also for sale: --- EWA Marine soft housing for Canon XL1 (XL2 could fit if you remove the shoulder support, although I haven't tried it). Included: soft case, 2lb divers weight, weight holder, desiccant, various step-up rings $350 *I only used this thing twice. Both times it was properly washed and dried. No leaks or tears present. Pickup in Austin, TX is preferred (or I'll meet you within a reasonable distance), but I will ship. Buyer pays actual shipping and insurance. Your choice of shipping methods (UPS, Fedex, etc). I prefer cash or cashiers check. Any personal checks will have to clear before shipping. Please email me or post here with any questions. Thanks! -Joseph Winchester

September 2nd, 2008, 11:28 AM	#4175
Brian Standing Major Player Join Date: Dec 2003 Location: Madison, Wisconsin Posts: 621	I think I have found another solution, so I am no longer in the market for this deck. Thanks to all who responded. __________________ http://www.prolefeedstudios.com/blog/ Documentary for the masses!

September 2nd, 2008, 01:27 PM	#4176
David Beisner Major Player Join Date: Jun 2008 Location: Dayton, TN (USA) Posts: 219	E-mail sent re: the camera... __________________ David Beisner Media Specialist, Bryan College, Dayton, TN -- www.bryan.edu

September 2nd, 2008, 10:29 PM	#4181
Jaadgy Akanni Major Player Join Date: May 2006 Location: new york city Posts: 346	Bump bumpiddy bump __________________ I will be KING!

September 2nd, 2008, 09:28 AM	#4171
Russell Feller Regular Crew Join Date: Sep 2007 Location: Cedar Falls, IA Posts: 85	Email Sent got a guy that will take them for $400 if interested.

September 2nd, 2008, 10:15 AM	#4173
Joe Winchester Regular Crew Join Date: Jan 2005 Location: Austin, TX Posts: 125	Please disregard this thread. I am parting everything out in a new thread. Thanks, -J

September 2nd, 2008, 03:07 PM	#4177
Jack Tran Regular Crew Join Date: Feb 2008 Location: Houston USA Posts: 90	intrested in glidecam, email sent

September 2nd, 2008, 03:12 PM	#4178
Jack Tran Regular Crew Join Date: Feb 2008 Location: Houston USA Posts: 90	also intrested in the wide if it fits on an canon hv30. also, do you know if the XH A1 lens hood fit on that lens? Edit: payment sent on glidecam. not intrested in the wide anymore.

September 2nd, 2008, 06:20 PM	#4179
Amos Kim Major Player Join Date: May 2006 Location: San Francisco, CA Posts: 335	bump... I use this unit to feed my 720p 24fps hdv tapes into my nle. 850? anyone?

September 2nd, 2008, 09:46 PM	#4180
Alex Raskin Trustee Join Date: Sep 2003 Posts: 1,435	Price just reduced to $899 plus shipping. (or pick up and save on shipping.) Offers welcome. If this video capture PC does not sell by Sep 8th, I'm disassembling it and selling parts separately.

September 3rd, 2008, 12:44 AM	#4183
Matt OBrien Regular Crew Join Date: Nov 2006 Location: Seattle WA Posts: 40	sold, thanks

September 3rd, 2008, 01:14 AM	#4184
Michael Nistler Major Player Join Date: Aug 2006 Location: Petaluma, CA Posts: 456	Teleprompter and Dave Uriarte are TOPS Hi all, I wanted to let everyone my pleasure with Dave Uriate's service associated with the sale of his teleprompter. He offered superb support through all phases of the sale (presale questions and negotiation, packaging/shipping, billing, and post-sales support). Thank you Dave for the great gear and fantastic service - highly recommended! Warm Regards, Michael

September 3rd, 2008, 02:57 AM	#4185
Mike Marriage Major Player Join Date: Sep 2005 Location: NE of London, England Posts: 788	Glidecam V25 I'm upgrading to a larger rig so I'm selling the V25. It's been a brilliant system and very flexible - you can basically fly any video or S16 camera on it. I haven't tried but it should handle a Red One without too many tons of accessories. The sled and arm come in a large Storm flight case. I can also supply a perfect C-stand for £85 and 4 Sony V-Locks for £80 each with the rig. The batteries are in great shape, one powered the rig all day yesterday on a 12 hour shoot with a lot of Steadicam. The rig is in near perfect condition. There are a few tiny scuff marks around the gimbal from docking. Operationally it is like new. I am about to VAT register, so if it is bought after I do, I'll be looking for £4500 GBP plus VAT @17.5%. If I am selling outside the UK VAT may not need to be added. Call me on 07773 179773 for more info/pictures or email: mmarriage@orange.net Rig is in the UK near London (Chelmsford) and I will ship worldwide if the buyer pays. __________________ www.mikemarriage.com