Private Classifieds listings from 2007

Jaron Berman · October 9th, 2007, 10:48 PM

FS: MY trust Vinten Vision 3 / Miller Solo combo. ABSOLUTELY FANTASTIC setup, especially if you have to travel a lot (which I did). Comes with #'s 2 & 3 springs, though you can throw in any spring supporting up to 22lbs. If you're looking at this posting, it's likely you know that this head is (pun intended) head and shoulders above anything near its price.

Comes with Miller Solo DV legs (aluminum), which makes a match made in heaven. Together, this system goes low, high, and does so with a lot of stability and quickness.

Shipped in Petrol padded sling bag, which has extra padding around the head, and a nice pocket for the springs and tools.

I am selling because I bought this tripod in anger - I was on a long gig traveling every day with crappy sticks. I'm no longer on the gig, and no longer need the sticks. Here's an opportunity to get this much talked about setup for less than new.

Condition-wise, the setup is excellent. There are a coule scratches on the pads on the legs, and a couple light brassing marks on the head. Basically, it looks like it's been outta the bag about twice.

$1587 New (without tax), Asking $1200.

Jaron Berman · October 9th, 2007, 10:55 PM

FS Altman 650L w/ Barndoors and Lamp (practically new) - $200
FS Altman 300L w/ Barndoors and Lamp (practically new) - $200

Lamps untested, though when I packed them they had <5 hours on them.

These lights are the same price new as Arris, though I got them because I found the build quality to be a bit better and the light output to be slightly higher for the same lamps. Selling because I've gone over to Dedo's for all my small lights. These are great units, but I simply don't use them anymore now that I have 5 x Dedo's.

Prices do not include shipping, non negotiable. Looking to build a fresnel kit? For about the price of knockoff ebay lights, you could start a great kit that will last a lifetime.

Brian Boyko · October 9th, 2007, 11:18 PM

Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam?

FlipVideo first generation, 30 minutes. If your kid has outgrown swallowing small parts, give it to them, let them play video maker like Mommy and Daddy. $85.

Rafael Lopes · October 10th, 2007, 12:08 AM

bump...........

Chris Soucy · October 10th, 2007, 12:59 AM

Hey, Video cards only come out when a system gets trashed or upgraded. The Matrox APVi is so rarely used (well, apart from me, that is) that there ain't many of them out there to start with.

Take that small number and figure, who's going to trash a system with so few hours on it/ upgrade ditto and you can see why you aren't having a lot of success.

I think if you REALLY want one, you may have to buy new, or have quite some wait.

Mine isn't up for grabs any time soon.

CS

Doug Tessler · October 10th, 2007, 07:05 AM

Now 150.00

Tyge Floyd · October 10th, 2007, 07:46 AM

How old is this RAM?

How many sticks?

Do you take PayPal?

Philip Gioja · October 10th, 2007, 08:08 AM

What would you sell it for minus the mic, tripod, and head? I realize you want to sell as a set, but I'm curious. Also, how much have you used this and what is the reason for selling?

Adam La Prade · October 10th, 2007, 10:13 AM

Hi Mark!

I believe the Flip Enhanced would work with the Canon HV20 with a few step down adapters. I have the 72mm version.

There is some footage floating around of the Flip Enhanced and the HV20!

Miles Torres · October 10th, 2007, 10:34 AM

Philip - I'd only take off a few bucks, seriously, the package is way underpriced as it is. I'm selling becuase we've had our use with it and we want to move it. The camera has about 20 hours on it.

Cheers
Miles
208.660.9097

Steve Maller · October 10th, 2007, 10:46 AM

Dude, you have a future in sales. LOL.

Jason Robinson · October 10th, 2007, 10:50 AM

Quote:

Originally Posted by Fernando Ortega

buuump.
still for sale.

Several questions....

I don't suppose you have a tripod available as well?

Also, I just this weekend used an XL1s with the same style of Mic holder and I was a little annoyed at how well camera body noises transfered to the mic (like pressing buttons, switches, etc). Are there any after market / 2nd/3rd party shock mounts available for this camera's mic holder?

Will send PM your way with other questions.

Ervin Farkas · October 10th, 2007, 10:56 AM

Just chop off the lens and the viewfinder and use it for transferring your tapes.

The most inexpensive camera-saver device... until it starts eating up your tapes that is...

Daniel Lang · October 10th, 2007, 11:56 AM

Quote:

Originally Posted by Daniel Lang

No the frame is perfectly in tact. Just the glass broke out. It still works nicely as a gel holder if need be. The diffusion is still in there too by the way. I'll post pics soon.

OK go to these links for pics

http://www.dvxuser6.com/uploaded/7555/1192037766.jpg

http://www.dvxuser6.com/uploaded/7555/1192037641.jpg

Denny Bryant · October 10th, 2007, 12:53 PM

Quote:

Originally Posted by Brian Boyko

Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam?

Is the ZR80 in full working condition? Any known problems?

October 9th, 2007, 10:48 PM	#4516
Jaron Berman Major Player Join Date: Mar 2006 Location: Los Angeles Posts: 439	FS Vinten Vision 3 Head Miller Solo Legs Case FS: MY trust Vinten Vision 3 / Miller Solo combo. ABSOLUTELY FANTASTIC setup, especially if you have to travel a lot (which I did). Comes with #'s 2 & 3 springs, though you can throw in any spring supporting up to 22lbs. If you're looking at this posting, it's likely you know that this head is (pun intended) head and shoulders above anything near its price. Comes with Miller Solo DV legs (aluminum), which makes a match made in heaven. Together, this system goes low, high, and does so with a lot of stability and quickness. Shipped in Petrol padded sling bag, which has extra padding around the head, and a nice pocket for the springs and tools. I am selling because I bought this tripod in anger - I was on a long gig traveling every day with crappy sticks. I'm no longer on the gig, and no longer need the sticks. Here's an opportunity to get this much talked about setup for less than new. Condition-wise, the setup is excellent. There are a coule scratches on the pads on the legs, and a couple light brassing marks on the head. Basically, it looks like it's been outta the bag about twice. $1587 New (without tax), Asking $1200.

October 9th, 2007, 10:55 PM	#4517
Jaron Berman Major Player Join Date: Mar 2006 Location: Los Angeles Posts: 439	FS Altman Fresnels FS Altman 650L w/ Barndoors and Lamp (practically new) - $200 FS Altman 300L w/ Barndoors and Lamp (practically new) - $200 Lamps untested, though when I packed them they had <5 hours on them. These lights are the same price new as Arris, though I got them because I found the build quality to be a bit better and the light output to be slightly higher for the same lamps. Selling because I've gone over to Dedo's for all my small lights. These are great units, but I simply don't use them anymore now that I have 5 x Dedo's. Prices do not include shipping, non negotiable. Looking to build a fresnel kit? For about the price of knockoff ebay lights, you could start a great kit that will last a lifetime.

October 9th, 2007, 11:18 PM	#4518
Brian Boyko Major Player Join Date: Dec 2006 Location: Austin, TX Posts: 773	Lousy stuff for Sale Canon ZR80. No mic input. 1CCD. Bad low-light performance. Asking $130, but for y'all, $100. Comes with cheap wide-angle/telephoto lenses bought at Best Buy. Crash cam? FlipVideo first generation, 30 minutes. If your kid has outgrown swallowing small parts, give it to them, let them play video maker like Mommy and Daddy. $85.

October 10th, 2007, 12:59 AM	#4520
Chris Soucy Inner Circle Join Date: Feb 2007 Location: Fairfield, Dunedin, New Zealand Posts: 3,691 Images: 18	Hi Rafael........... Hey, Video cards only come out when a system gets trashed or upgraded. The Matrox APVi is so rarely used (well, apart from me, that is) that there ain't many of them out there to start with. Take that small number and figure, who's going to trash a system with so few hours on it/ upgrade ditto and you can see why you aren't having a lot of success. I think if you REALLY want one, you may have to buy new, or have quite some wait. Mine isn't up for grabs any time soon. CS

October 10th, 2007, 07:05 AM	#4521
Doug Tessler Major Player Join Date: Nov 2006 Location: BOCa raton fl Posts: 342	now only 150 Now 150.00

October 10th, 2007, 12:08 AM	#4519
Rafael Lopes Trustee Join Date: Sep 2005 Location: Rio de Janeiro Posts: 1,240	bump...........

October 10th, 2007, 07:46 AM	#4522
Tyge Floyd Major Player Join Date: Dec 2003 Location: Ft. Worth, Texas Posts: 287	How old is this RAM? How many sticks? Do you take PayPal? __________________ At full draw, Tyge Floyd

October 10th, 2007, 08:08 AM	#4523
Philip Gioja Major Player Join Date: Nov 2005 Location: Piper City, IL Posts: 350	What would you sell it for minus the mic, tripod, and head? I realize you want to sell as a set, but I'm curious. Also, how much have you used this and what is the reason for selling? Last edited by Philip Gioja; October 10th, 2007 at 08:10 AM. Reason: clarification and one more question.

October 10th, 2007, 10:13 AM	#4524
Adam La Prade Regular Crew Join Date: Mar 2006 Location: Orlando, FL Posts: 77	Hi Mark! I believe the Flip Enhanced would work with the Canon HV20 with a few step down adapters. I have the 72mm version. There is some footage floating around of the Flip Enhanced and the HV20!

October 10th, 2007, 10:34 AM	#4525
Miles Torres New Boot Join Date: Jun 2007 Location: Coeur d Alene, ID Posts: 8	gear Philip - I'd only take off a few bucks, seriously, the package is way underpriced as it is. I'm selling becuase we've had our use with it and we want to move it. The camera has about 20 hours on it. Cheers Miles 208.660.9097

October 10th, 2007, 10:46 AM	#4526
Steve Maller Major Player Join Date: Sep 2006 Location: Burlingame, CA USA Posts: 285	Dude, you have a future in sales. LOL. __________________ me@facebook: http://facebook.com/stevemallerphotography

October 10th, 2007, 10:56 AM	#4528
Ervin Farkas Inner Circle Join Date: Aug 2005 Location: Atlanta/USA Posts: 2,515	Forget filming with it! Just chop off the lens and the viewfinder and use it for transferring your tapes. The most inexpensive camera-saver device... until it starts eating up your tapes that is... __________________ Ervin Farkas www.AtlantaLegalVideo.com