Private Classifieds listings from 2012 at DVinfo.net

Bob Krieger · January 1st, 2012, 12:16 AM

sale pending

Kieran McConville · January 1st, 2012, 07:05 AM

Wonderful machine. Bought it about 18 months ago but now no longer need it. In original packaging with all the bits. €800.

Kieran McConville · January 1st, 2012, 07:11 AM

In good condition. €200.

Kieran McConville · January 1st, 2012, 07:23 AM

Head, plate and single stage legs with Vinten bag. This has seen some action but actually still works just fine. €350.

Kieran McConville · January 1st, 2012, 07:34 AM

With built-in v-lock plate. I have done a couple of modifications for balance and to take a radio-mic receiver. Mightn't have made it prettier but definitely more effective! Includes a Panasonic version of the Sony VCTU14 tripod plate adapter. €300.

Kieran McConville · January 1st, 2012, 07:41 AM

This camera is perfect EXCEPT one of the ccds doesn't work anymore! At least that's what my JVC dealer told me. Red, green but no blue. And out of warranty. Doesn't that just break your heart? If it's of any use to you take it away.

Paul R Johnson · January 1st, 2012, 09:33 AM

Despite being tempted to offer to take it off your hands, the chances of the fault being exactly what they have told you is quite small. If a CCD fails on chip - then you usually get part of the image. No image at all from that sensor suggests that the driver circuitry could be to blame. So it could potentially be repaired - the snag is the time to do it probably makes it uneconomic to repair - this is usually what workshops use as a guide to say something is scrap - it could be fixed, given time. An enthusiast with plenty of time could fix it?

Other than that, the viewfinder, tripod plate and the lens still have value. Stick it on ebay and you'll have the choice of breaking it for spares, or selling it as 'for spares or repair'.

It still has value - not much, but still worth doing.

Kieran McConville · January 1st, 2012, 09:44 AM

Thanks for that Paul. I'm not great with the whole ebay thing but I might give it a shot. If I knew anything about circuitry I would have a go - but sadly not.

Ned Soltz · January 1st, 2012, 01:27 PM

Zoom H4N - Excellent condition. Includes hard case, foam windscreen. I cannot at the moment locate the AC adapter but will send it in the event it turns up. But to compensate for lack of AC Adapter ($22 at Amazon), I throw in a 16gb Transcend SD card and newly-replaced Energizer Ultimate Lithium Batteries. Firmware is up to date. $225 including free shipping CONUS, others, please ask about shipping. PayPal preferred.

2 Zoom H4's. Each has AC power supply and clip-on plastic back for stand mounting. $110 each free shipping CONUS. Both for $200.

Ned Soltz

Nick Weeks · January 1st, 2012, 02:17 PM

I've upgraded to the R0DE VideoMic pro and no longer need these two units. Selling for US $80/each plus shipping cost. Email me your zip code for a shipping quote.

Nick Weeks · January 1st, 2012, 03:01 PM

Sold! That was quick.....

Nick Weeks · January 1st, 2012, 03:03 PM

Sigma 14mm f/2.8 EX for Canon. Great wide-angle lens, works on full-frame (5D) or other crop cameras. Excellent condition, only very minor dust inside that doesn't show in photos or video (no mold). Vignettes at f/2.8, but looks great at f/4.0 and higher. Used for about a year, now discontinued from Sigma. Asking US $400 plus shipping cost.

Reason for selling? I'm now using the Tokina 11-16mm f/2.8 on the Canon 60D/7D, so I no longer need this lens. It's been an excellent lens so far, still in great working condition. Front element is in mint condition, and the lens body itself shows very little signs of wear.

Email me your shipping address for a quote.

More info:
Sigma 14mm
Sigma 14mm F2.8 EX ASPH HSM Lens Review

Scott Holchin · January 1st, 2012, 04:55 PM

Looking to buy a used Rode NTG-1. Must have all parts.

Scott Holchin · January 1st, 2012, 09:47 PM

Do you still have this for sale?

Matt Bigwood · January 2nd, 2012, 12:03 PM

The lens has some value as it would fit a Sony Z7 / S270 - I use one on mine.

January 1st, 2012, 12:16 AM	#1
Bob Krieger Major Player Join Date: Jan 2010 Location: Abita Springs, LA Posts: 245	Private Classifieds listings from 2012 sale pending

January 1st, 2012, 07:05 AM	#2
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	Matrox MXO2 i/o Wonderful machine. Bought it about 18 months ago but now no longer need it. In original packaging with all the bits. €800. Attached Thumbnails Last edited by Kieran McConville; January 1st, 2012 at 08:21 AM. Reason: add pic

January 1st, 2012, 07:11 AM	#3
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	Coles Lip Ribbon Commentators mic In good condition. €200. Attached Thumbnails Last edited by Kieran McConville; January 1st, 2012 at 08:24 AM. Reason: add pic

January 1st, 2012, 07:23 AM	#4
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	Vinten Vision 5LF tripod Head, plate and single stage legs with Vinten bag. This has seen some action but actually still works just fine. €350. Attached Thumbnails Last edited by Kieran McConville; January 1st, 2012 at 08:28 AM. Reason: add pic

January 1st, 2012, 07:34 AM	#5
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	ST-7 shoulder mount for PMWEX3 With built-in v-lock plate. I have done a couple of modifications for balance and to take a radio-mic receiver. Mightn't have made it prettier but definitely more effective! Includes a Panasonic version of the Sony VCTU14 tripod plate adapter. €300. Attached Thumbnails Last edited by Kieran McConville; January 1st, 2012 at 08:32 AM. Reason: add pic

January 1st, 2012, 07:41 AM	#6
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	JVC GYHD-111E for parts This camera is perfect EXCEPT one of the ccds doesn't work anymore! At least that's what my JVC dealer told me. Red, green but no blue. And out of warranty. Doesn't that just break your heart? If it's of any use to you take it away. Attached Thumbnails Last edited by Kieran McConville; January 1st, 2012 at 08:33 AM.

January 1st, 2012, 09:33 AM	#7
Paul R Johnson Inner Circle Join Date: Nov 2005 Location: Lowestoft - UK Posts: 4,045	Re: JVC GYHD-111E for parts Despite being tempted to offer to take it off your hands, the chances of the fault being exactly what they have told you is quite small. If a CCD fails on chip - then you usually get part of the image. No image at all from that sensor suggests that the driver circuitry could be to blame. So it could potentially be repaired - the snag is the time to do it probably makes it uneconomic to repair - this is usually what workshops use as a guide to say something is scrap - it could be fixed, given time. An enthusiast with plenty of time could fix it? Other than that, the viewfinder, tripod plate and the lens still have value. Stick it on ebay and you'll have the choice of breaking it for spares, or selling it as 'for spares or repair'. It still has value - not much, but still worth doing.

January 1st, 2012, 09:44 AM	#8
Kieran McConville Regular Crew Join Date: Oct 2010 Location: New York, New York, USA Posts: 26	Re: JVC GYHD-111E for parts Thanks for that Paul. I'm not great with the whole ebay thing but I might give it a shot. If I knew anything about circuitry I would have a go - but sadly not.

January 1st, 2012, 01:27 PM	#9
Ned Soltz Major Player Join Date: May 2006 Location: Teaneck, NJ Posts: 659	Zoon H4N + 2 Zoom H4 Zoom H4N - Excellent condition. Includes hard case, foam windscreen. I cannot at the moment locate the AC adapter but will send it in the event it turns up. But to compensate for lack of AC Adapter ($22 at Amazon), I throw in a 16gb Transcend SD card and newly-replaced Energizer Ultimate Lithium Batteries. Firmware is up to date. $225 including free shipping CONUS, others, please ask about shipping. PayPal preferred. 2 Zoom H4's. Each has AC power supply and clip-on plastic back for stand mounting. $110 each free shipping CONUS. Both for $200. Ned Soltz

January 1st, 2012, 02:17 PM	#10
Nick Weeks Major Player Join Date: Jan 2006 Location: Birmingham, AL USA Posts: 722	2x R0DE VideoMic w/ original box (US$80/ea plus shipping) I've upgraded to the R0DE VideoMic pro and no longer need these two units. Selling for US $80/each plus shipping cost. Email me your zip code for a shipping quote. Attached Thumbnails __________________ http://snaplifestudios.com

January 1st, 2012, 03:01 PM	#11
Nick Weeks Major Player Join Date: Jan 2006 Location: Birmingham, AL USA Posts: 722	Re: 2x R0DE VideoMic w/ original box (US$80/ea plus shipping) Sold! That was quick..... __________________ http://snaplifestudios.com

January 1st, 2012, 03:03 PM	#12
Nick Weeks Major Player Join Date: Jan 2006 Location: Birmingham, AL USA Posts: 722	Sigma 14mm f/2.8 EX lens for Canon - US$400 plus shipping Sigma 14mm f/2.8 EX for Canon. Great wide-angle lens, works on full-frame (5D) or other crop cameras. Excellent condition, only very minor dust inside that doesn't show in photos or video (no mold). Vignettes at f/2.8, but looks great at f/4.0 and higher. Used for about a year, now discontinued from Sigma. Asking US $400 plus shipping cost. Reason for selling? I'm now using the Tokina 11-16mm f/2.8 on the Canon 60D/7D, so I no longer need this lens. It's been an excellent lens so far, still in great working condition. Front element is in mint condition, and the lens body itself shows very little signs of wear. Email me your shipping address for a quote. More info: Sigma 14mm Sigma 14mm F2.8 EX ASPH HSM Lens Review Attached Thumbnails __________________ http://snaplifestudios.com

January 1st, 2012, 04:55 PM	#13
Scott Holchin Regular Crew Join Date: Jan 2011 Location: Fairview Park, Ohio Posts: 29	Ntg-1 Looking to buy a used Rode NTG-1. Must have all parts.

January 1st, 2012, 09:47 PM	#14
Scott Holchin Regular Crew Join Date: Jan 2011 Location: Fairview Park, Ohio Posts: 29	Re: Marshall HDMI Monitor 7" Do you still have this for sale?

January 2nd, 2012, 12:03 PM	#15
Matt Bigwood Major Player Join Date: Apr 2008 Location: Gloucester UK Posts: 223	Re: JVC GYHD-111E for parts The lens has some value as it would fit a Sony Z7 / S270 - I use one on mine.