|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 15th, 2011, 10:57 AM
|
#1741 |
|
Regular Crew
Join Date: Jan 2011
Location: Nashville, TN
Posts: 78
|
Sony PMW-EX1 Kit, Basic Accessories
PLEASE NOTE: This camera is in good working order with the following exception: the component video output jack is not functional. During use, a cable was pulled, and damaged the port. All other functions and outputs, including the Video output and HD-SDI output are in good working order.
****** I recently upgraded to a PMW-EX3, and I also have a PMW-F3. So, I'm selling my PMW-EX1. It's served me well, but I don't need all three cameras. Basic info: *I'm the second owner. First owner was a post production house, they barely used it. *I acquired it in late 2008 * Serial number is 1025xx *Kept in a smoke free home. *Never dropped. *Upgraded to firmware V1.20 *Has been tested to accept SxS-1 and SDHC cards with current firmware, as would be expected. *Has 818H on hours meter. Please note, this means total hours on, not necessarily recording - and as a tapeless camera, there are no drum hours. *COMPONENT VIDEO OUTPUT PORT IS BROKEN. This happened over a year ago on a set. A PA tripped over the cord, and damaged the port. Research indicated this could be repaired, but I was out of warranty, and as most of my monitoring is HD-SDI, I opted not to repair at that time. Physically, the circuit board for the video output would likely need to be replaced. Service cost would likely be higher than the part cost. *All other functions work well. *Lens is clean, and without scratches. *Camera does has general cosmetic wear. As you'll note in the pictures, some labeling on the camera body has faded. *Has been used for work within the past month. Works great. *Included BP-U30 battery holds a good charge *Included 8GB SxS Pro card is in good working order. What's included: (very similar to retail kit) *Sony PMW-EX1 Camcorder *8 GB SxS Pro Card *BP-U30 Battery *Sony Charger (also serves as an AC power source for camera) *Remote control *Sony Strap, never used *Composite A/V Cable (not sure it's the one originally from Sony, but tested, and works) *User Manual Asking price: $4,250 (USD) Located Nashville, TN, USA Pictures:      
__________________
www.viddovation.com |
|
|
May 15th, 2011, 10:58 AM
|
#1742 |
|
Regular Crew
Join Date: Jan 2011
Location: Nashville, TN
Posts: 78
|
Re: Sony EX1 or EX1R or NX5U
I'm selling an EX1. Located in Tennessee, would consider shipping.
http://www.dvinfo.net/forum/private-...ml#post1649370
__________________
www.viddovation.com |
|
|
|
May 15th, 2011, 11:01 AM
|
#1743 |
|
Major Player
Join Date: Apr 2006
Location: Cedar Rapids, IA
Posts: 563
|
Re: K-Tek Avalon Boom Pole
The boom pole is still available. Price reduced to $320. I'm attaching a picture of it.
- Martin
__________________
Martin Pauly |
|
|
|
May 15th, 2011, 01:14 PM
|
#1744 |
|
Major Player
Join Date: Sep 2005
Location: NE of London, England
Posts: 788
|
Re: Complete Gear Clearout due to going blind
Paul, also very sorry to hear the news.
Please do post prices if possible, there are a number of items I would be interested in at the right price.
__________________
www.mikemarriage.com |
|
|
|
May 15th, 2011, 01:43 PM
|
#1745 |
|
Regular Crew
Join Date: Mar 2011
Location: Waterford, Michigan
Posts: 135
|
Softbox 3pt kit
We have Upgraded to full LED Kit
These are Tungsten continues lights, no speed rings, not a flash or strobe. Softboxes connect directly to the headunits... No Stands 1 - large 42 x 29 softbox 2 - Small 20 x 16.5 softboxes 3 - Light Heads 3 - Stand to head clamps 3 - dimmers 6 - various umbrellas for diffusion / bounce 3 - 500 watt bulbs 3 - 1000 watt bulbs All cords 500 to 3000 watt capable Eggcrate, ciculair, square, diffuser scrims for each box Brand: Dynaphos - Professional Photo and Video Studio Light ans Accessories These are decent quality and serve the purpose very well $230.00 to your door Open to trades, wireless camera mount lav's |
|
|
|
May 15th, 2011, 04:03 PM
|
#1746 |
|
Sponsor: Abel CineTech
Join Date: Feb 2009
Location: New York, NY
Posts: 361
|
Re: Steadicam Pilot-AA
The Steadicam is still available and I have attached some pictures. I tested it out again today and everything is in working order. The scratches on the LCD aren't bad, but could be annoying to some. Not a big deal for me because it is used for framing only.
In my pictures I have the whole setup on an Arri light stand. A short C-stand (or turtle stand) is recommended but I can include that if you want it.
__________________
Andy Shipsides -Camera Technology Specialist AbelCineTech, New York - Visit our Blog - http://blog.abelcine.com |
|
|
|
May 15th, 2011, 04:08 PM
|
#1747 | |
|
Sponsor: Abel CineTech
Join Date: Feb 2009
Location: New York, NY
Posts: 361
|
Re: Steadicam Pilot-AA
Quote:
__________________
Andy Shipsides -Camera Technology Specialist AbelCineTech, New York - Visit our Blog - http://blog.abelcine.com |
|
|
|
|
May 15th, 2011, 04:19 PM
|
#1748 |
|
Major Player
Join Date: Jul 2010
Location: Montreal
Posts: 388
|
Re: Complete Gear Clearout due to going blind
Wow, thats terrible to hear man - glad to hear your taking it all in stride.
If you don't mind, when you get your prices in order, I might be interested in some CF cards and maybe the 526 (depending when my paycheck from the last production comes in.... you know...) if you don't mind the whole shipping across the pond business. Just update the thread and I'll see it... |
|
|
|
May 15th, 2011, 05:26 PM
|
#1749 |
|
Major Player
Join Date: Feb 2005
Location: Indianapolis, Indiana
Posts: 218
|
Re: Softbox 3pt kit
Michael, I might be interested. Drop me an email:
vencevida (at) mac (dot) com
__________________
Sony PMW-EX1R, Canon XL H1, XHG1, Panasonic GH2, Mac Pro 3.2 Quad running FCPS 3, FCPX, & Adobe Creative Cloud CC www.creativejuicesvideo.com |
|
|
|
May 15th, 2011, 05:35 PM
|
#1750 |
|
Major Player
Join Date: Feb 2005
Location: Indianapolis, Indiana
Posts: 218
|
Re: Complete Gear Clearout due to going blind
A difficult decision in a rotten situation. Definitely not something you like to hear. My prayers are with you.
There are several pieces I might be interested in, but I'm in the States, so if you change your mind about shipping outside of EU, let us know.
__________________
Sony PMW-EX1R, Canon XL H1, XHG1, Panasonic GH2, Mac Pro 3.2 Quad running FCPS 3, FCPX, & Adobe Creative Cloud CC www.creativejuicesvideo.com |
|
|
|
May 15th, 2011, 08:27 PM
|
#1751 |
|
Major Player
Join Date: Feb 2009
Location: Charlotte, NC
Posts: 427
|
Sony PD170
Any interest in A PD170 with fairly low hours? Heads have been cleaned at regular intervals and CCD's were changed at Sony. Probably shot only a dozen times afterward. Looking for $850. I will post all relevant info if there is any interest. Send an e-mail.
|
|
|
|
May 15th, 2011, 09:09 PM
|
#1752 |
|
Regular Crew
Join Date: Jun 2010
Location: binghamton ny
Posts: 82
|
Re: lenses
more specific on the 18-55 lens please?
|
|
|
|
May 15th, 2011, 09:10 PM
|
#1753 |
|
Regular Crew
Join Date: Jun 2010
Location: binghamton ny
Posts: 82
|
Stabilization System for 5dmarkii
I am looking for any stabilization system that includes a focusing system for my 5d mark ii.
|
|
|
|
May 15th, 2011, 09:54 PM
|
#1754 |
|
Regular Crew
Join Date: Mar 2011
Location: Waterford, Michigan
Posts: 135
|
Re: Softbox 3pt kit
SOLD...Thanks
Last edited by Michael C. Ray; May 16th, 2011 at 05:41 PM. |
|
|
|
May 15th, 2011, 11:24 PM
|
#1755 |
|
Wrangler
Join Date: Jun 2002
Location: Vancouver, British Columbia
Posts: 8,314
|
Re: Complete Gear Clearout due to going blind
I should ad there are a couple things I'm interested in as well, if you will ship to North America and post prices.
__________________
Need to rent camera gear in Vancouver BC? Check me out at camerarentalsvancouver.com |
|
|
|
| ||||||
|
||||||
|
|
