|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 26th, 2010, 09:25 PM
|
#1 |
|
Regular Crew
Join Date: Feb 2008
Location: Cobleskill, NY
Posts: 51
|
Hot/cold shoe requirements (Blender + EX3)
This is a question I really should already know the answer to...
I have a Sony EX3 and am considering the purchase of a Lowel Blender. To attach this to the camera's accessory shoe, will I need to get one of these? http://www.bhphotovideo.com/c/product/332815-REG/WindTech_CM_57_CM_57_Hot_Shoe_Adapter.html I'm not sure if this is the right size, etc - seems pretty simple, but I don't know what I need.... Thanks! |
|
|
|
August 30th, 2010, 02:08 PM
|
#2 |
|
Tourist
Join Date: Feb 2010
Location: Fargo, ND
Posts: 3
|
From the Lowel website, on the Blender page (lowel.com/blender), under the link "Uses These Stands & Mounts" -
To use the 1/4-20 hole on top of the camera, and for the lowest mounting, replace the stand adaptor with Low-link (code ViP-37) The Cam-link and Stud-link (Code: ViP-41S) uses the light's stand adaptor for a little height to get over a long lens or matte box, and for easy transfers to and from light stands. The Low-link with a Cam- link (Code: ViP-41L ) allows a lower mount utilizing the accessory shoe. |
|
|
|
|
August 30th, 2010, 07:55 PM
|
#3 |
|
Regular Crew
Join Date: Feb 2008
Location: Cobleskill, NY
Posts: 51
|
Don-
Thanks very much for your reply to this. Very helpful. --Nathan |
|
|
|
|
| ||||||
|
||||||
|
|
