HVX200 Sniper Rifle and AR-15's plus explosions. at DVinfo.net

Erick von Schulz · March 13th, 2010, 09:51 PM

Here is some stuff I shot over the past few months for a demo reel.

Most of the weapons are real except for the hand gun scenes.

Dan Brockett · March 13th, 2010, 11:52 PM

Hi:

All of your stuff has nice color and composition but several of the shots look too soft or out of focus to me. Nice work but check that focus more. It is tough with the HVX, that screen is tough to see accurate focus with.

Good luck,

Dan

Robert Lane · March 14th, 2010, 10:57 AM

Dan is right, focus is way off. It's obvious you're using a lens adapter system so I'd check your setup and make sure you're focusing properly on the ground-glass first and that you've "locked it down" with tape after making your final setup. Alignment is also important so if your rig isn't properly mated to the front end of the camera you'll get image skew.

March 13th, 2010, 09:51 PM	#1
Erick von Schulz Regular Crew Join Date: Dec 2005 Posts: 78	HVX200 Sniper Rifle and AR-15's plus explosions. Here is some stuff I shot over the past few months for a demo reel. DP, Colorist, Director, Edtor, Producer, Idiot, Demo Reel on Vimeo Most of the weapons are real except for the hand gun scenes.

March 13th, 2010, 11:52 PM	#2
Dan Brockett Inner Circle Join Date: Feb 2006 Location: Los Angeles, California Posts: 2,109	Hi: All of your stuff has nice color and composition but several of the shots look too soft or out of focus to me. Nice work but check that focus more. It is tough with the HVX, that screen is tough to see accurate focus with. Good luck, Dan

March 14th, 2010, 10:57 AM	#3
Robert Lane Go Go Godzilla Join Date: Nov 2004 Location: Scottsdale, AZ USA Posts: 2,819 Images: 15	Dan is right, focus is way off. It's obvious you're using a lens adapter system so I'd check your setup and make sure you're focusing properly on the ground-glass first and that you've "locked it down" with tape after making your final setup. Alignment is also important so if your rig isn't properly mated to the front end of the camera you'll get image skew.