GenLock Problem at DVinfo.net

Alaa Ghuniem · April 10th, 2008, 01:33 AM

Hi :
I have three HVX200 and I have VTR = Panasonic SD93 and I put mixer from Panasonic MX70 but when I cut from one camera to another the fliker happened
I don't have genlock coz HVX200 did not have
so what I shall do

Alaa Ghuniem · April 17th, 2008, 01:39 AM

this is Panasonic official
Kindly be informed the MX70 has two built-in frame synchronizers.

If you have more than two cameras that cannot be externally genlocked then you need to have an external frame synchronizer and that could help to solve the problem.

Jan Crittenden Livingston · April 20th, 2008, 05:20 AM

Quote:

Originally Posted by Alaa Ghuniem

If you have more than two cameras that cannot be externally genlocked then you need to have an external frame synchronizer and that could help to solve the problem.

When making a switch in a live shoot, do not cut from buss to buss. Cut from one camera to another on the same buss. This will resolve the issue. If you then get a frame delay, go into the menus, and no I do not remember which one it is but it is in the setup of the MX70, there is a menu for Frame Delay, turn it off.

Best of luck,

Jan

April 10th, 2008, 01:33 AM	#1
Alaa Ghuniem New Boot Join Date: Jan 2008 Location: Syria Posts: 15	GenLock Problem Hi : I have three HVX200 and I have VTR = Panasonic SD93 and I put mixer from Panasonic MX70 but when I cut from one camera to another the fliker happened I don't have genlock coz HVX200 did not have so what I shall do

April 17th, 2008, 01:39 AM	#2
Alaa Ghuniem New Boot Join Date: Jan 2008 Location: Syria Posts: 15	Panasonic reply this is Panasonic official Kindly be informed the MX70 has two built-in frame synchronizers. If you have more than two cameras that cannot be externally genlocked then you need to have an external frame synchronizer and that could help to solve the problem.