My color bars are bleeding at DVinfo.net

Eric T. Johnson · April 9th, 2007, 11:12 AM

Hi, I'm calibrating my brand new JVC TM-H150CGU and when I generate color bars from the DVX they bleed slightly onto each other. I was able to calibrate the monitor properly despite this, but I was never able to stop the bleeding. The DVX was hooked up via S-Video.

Please help!

Oliver Fokin · April 15th, 2007, 03:41 AM

It's the DV compression that is causing the color bleeding. Push "color off" and you should see a the bars clear in B&W. I have a 17" JVC myself and get the same results so don't worry, you're monitor is fine :)

April 9th, 2007, 11:12 AM	#1
Eric T. Johnson New Boot Join Date: Feb 2007 Location: Orange County, CA Posts: 11	My color bars are bleeding Hi, I'm calibrating my brand new JVC TM-H150CGU and when I generate color bars from the DVX they bleed slightly onto each other. I was able to calibrate the monitor properly despite this, but I was never able to stop the bleeding. The DVX was hooked up via S-Video. Please help!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

April 15th, 2007, 03:41 AM	#2
Oliver Fokin Tourist Join Date: Oct 2003 Posts: 1	It's the DV compression that is causing the color bleeding. Push "color off" and you should see a the bars clear in B&W. I have a 17" JVC myself and get the same results so don't worry, you're monitor is fine :)