|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 17th, 2006, 11:47 PM
|
#1 |
|
Tourist
Join Date: Jun 2006
Location: Cleveland, Ohio
Posts: 4
|
HDV to DV conversion
I've heard that HDV can be downconverted to DV through the firewire output. How is this achieved? I need to combine some DV footage to the downconverted HDV footage on the same PPro timeline.
Last edited by Bill McCallum; June 17th, 2006 at 11:48 PM. Reason: misspelling |
|
|
|
June 17th, 2006, 11:59 PM
|
#2 |
|
Inner Circle
Join Date: Nov 2005
Location: Elk Grove CA
Posts: 6,838
|
The HDV camera will have to have that capability. In other words it has the ability to capture in HDV, and then down convert at time of capture. All the Sony HDV cams have that ability.
I am not sure what Premiere version you are using, but you could also capture and convert in Premiere, assuming you have the proper version. PPro 1.51 or 2.0.
__________________
Chris J. Barcellos |
|
|
|
|
June 18th, 2006, 09:23 AM
|
#3 |
|
Tourist
Join Date: Jun 2006
Location: Cleveland, Ohio
Posts: 4
|
HDV to DV conversion
I'm using the JVC HD100 and I thought this camera could accomplish that feat, but I can't seem to get it to work.
|
|
|
|
|
June 18th, 2006, 09:34 AM
|
#4 |
|
Regular Crew
Join Date: Jan 2006
Location: Hesselager - Denmark
Posts: 27
|
m2t
You will only get M2T files (native HDV) through the firewire on th gy-hd100.
Conversion shouldt be possible during live capture via component out. Depending on your NLE you should let this handle the conversion. regards Erik |
|
|
|
|
June 18th, 2006, 10:36 AM
|
#5 |
|
Wrangler
Join Date: Oct 2002
Location: Los Angeles, CA
Posts: 2,100
|
To clarify, the HD100 will not downconvert to DV/Firewire. Only will downconvert to analog component or composite.
__________________
My Work: nateweaver.net |
|
|
|
|
June 18th, 2006, 05:40 PM
|
#6 |
|
Regular Crew
Join Date: Dec 2005
Posts: 51
|
HOw to do downconverting via component or composite? Do i need any capture card or something?
|
|
|
|
|
June 19th, 2006, 05:20 PM
|
#7 |
|
New Boot
Join Date: Nov 2005
Posts: 13
|
Will not downconvert to DV/Firewire while recording to HDV, or will not do it at all? If not, what is your recommended workflow for getting to SD signal on DV tape (considering that I'm in a non-HD Avid environment unlike Bill)?
|
|
|
|
|
June 26th, 2006, 04:10 PM
|
#8 | |
|
New Boot
Join Date: Nov 2005
Posts: 13
|
Quote:
Both the JVC camera (HD100) and deck (BR HD50u) will do downconversions but the output mode is analog component via RCA jacks, so as long as you have a deck that will take that input you're good -- no capture cards needed. |
|
|
|
|
|
June 26th, 2006, 04:29 PM
|
#9 | |
|
JVC America
Join Date: Mar 2005
Location: McKinney, TX
Posts: 516
|
Quote:
Check the "HDV PB Output menu setting on the Video Format menu screen. This controls what kind of signal comes out of the analog outputs on the right side of the camera. You can upconvert, down convert, and cross convert. The output signal is composite analog or component analog. If you need to then capture this signal to a NLE, you will need a capture card of some sort. It is not possible to downconvert via the firewire. Check page 63 of your owner's manual for details on this menu. Regards, Carl
__________________
Carl Hicks JVC Professional Products Company |
|
|
|
|
|
| ||||||
|
||||||
|
|
