|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
April 18th, 2006, 04:58 PM
|
#1 |
|
Regular Crew
Join Date: Jul 2005
Posts: 80
|
SD card access problem
Hi there,
I was just trying to save some of the scene file setups some of you guys have generously told us all about on this forum....thanks by the way..... but when i try to write them to the card or even format my card i get a message saying "ERROR SD CARD- NO ACCESS- PUSH JOG BUTTON" Anyone else seen this message? Is it a fault or am i just doing something wrong? Iv'e tried 2 different SD cards........ thanks Craig P.s. iv'e had my 101-e for almost 12 months now and apart from this problem, a sticky macro and some dirty heads from the factory (1st few tapes were full of dropouts- hundreds of em') ive enjoyed using this camera a lot and very happy with my purchase.... ..... |
|
|
|
April 18th, 2006, 06:12 PM
|
#2 |
|
Major Player
Join Date: Aug 2005
Posts: 248
|
Have you formatted the card? If not, go through your menu to that option and you should have access.
Warren |
|
|
|
|
April 18th, 2006, 06:40 PM
|
#3 |
|
Obstreperous Rex
|
If it's an SD (Secure Digital) card, are you sure that the little slide switch on its side is not set to the locked position?
|
|
|
|
|
April 18th, 2006, 06:52 PM
|
#4 | |
|
Major Player
|
Quote:
I can't use the supplied Panasonic cards at all, and also had a problem with Kingston. I bought Sandisk and working just fine. (I use 256mb because I can't find smaller) Wierd, very wierd. I tought I'm the only one, and I never asked. But look like I'm not the only one. Laszlo |
|
|
|
|
|
April 18th, 2006, 09:01 PM
|
#5 |
|
Regular Crew
Join Date: Jul 2005
Posts: 80
|
Strange things have happened since.....
Firstly i had tried to format the card only to get the same message so i pulled it out, checked the tab wasnt in, burnt some incense, rotated the card 7 times for good luck then flipped it 7 times for more good luck and put it back in the camera. Amazingly that seemed to work, came up with positive result- SD CARD FORMATTED. Then , when i tried to load a scene file (manually) on any of the card files it gives the option then quickly changes back to cam 1 or cam 2 scene files. Will not let me execute scene file to sd card..... Any thoughts? Craig |
|
|
|
|
| ||||||
|
||||||
|
|
