Mounting the JVC MR-HD100 on a GY-HD110 with AB?

Terry VerHaar · March 8th, 2009, 07:58 PM

Unfortunately, the holes in the cradle don't even come close to matching the holes on the bracket. That's sort of what is frustrating since I bought this specific bracket (ABWMK-HD-100) at the recommendation of an Anton-Bauer rep. Unless there is a different/better bracket I'll have to resort to the Velcro approach or drill different holes in the bracket.

I was just holding out hope that the "store bought" solution that was recommended would actually work.

Alex Humphrey · March 9th, 2009, 05:33 PM

This probably doesn't help, but IDX has a good wireless mount. (costs 3x what your does) I'll look at it when I'm home and see how it mounts. It MIGHT fit a AB back end, but I tend to doubt it. Now the mount you bought, looks like it would work. Put FE-DTE-100 in cradel, remove bolt from back of DTE cradel, put through mount, screw into cradel, done. It should fit one of the holes.

Marty Jenoff · August 4th, 2010, 11:42 AM

I know this post is from awhile ago, but what about this:
Anton Bauer HDMPA Hard Disk Recorder Mounting Plate HDMPA - B&H

Gan Eden · September 15th, 2010, 05:15 AM

Can a magic arm be used to mount the DR HD100? If so what suggestions please?

August 4th, 2010, 11:42 AM	#18
Marty Jenoff Regular Crew Join Date: Jan 2009 Location: Baltimore, MD Posts: 102	I know this post is from awhile ago, but what about this: Anton Bauer HDMPA Hard Disk Recorder Mounting Plate HDMPA - B&H __________________ Marty Jenoff www.focalpp.com

March 8th, 2009, 07:58 PM	#16
Terry VerHaar Regular Crew Join Date: Dec 2006 Location: Menlo Park, CA Posts: 53	Unfortunately, the holes in the cradle don't even come close to matching the holes on the bracket. That's sort of what is frustrating since I bought this specific bracket (ABWMK-HD-100) at the recommendation of an Anton-Bauer rep. Unless there is a different/better bracket I'll have to resort to the Velcro approach or drill different holes in the bracket. I was just holding out hope that the "store bought" solution that was recommended would actually work.

March 9th, 2009, 05:33 PM	#17
Alex Humphrey Major Player Join Date: Mar 2007 Location: california North and South Posts: 642	This probably doesn't help, but IDX has a good wireless mount. (costs 3x what your does) I'll look at it when I'm home and see how it mounts. It MIGHT fit a AB back end, but I tend to doubt it. Now the mount you bought, looks like it would work. Put FE-DTE-100 in cradel, remove bolt from back of DTE cradel, put through mount, screw into cradel, done. It should fit one of the holes.

September 15th, 2010, 05:15 AM	#19
Gan Eden Regular Crew Join Date: Aug 2010 Location: Golden Outback, Australia Posts: 55	Can a magic arm be used to mount the DR HD100? If so what suggestions please?