How much does it cost to replace a CCD block for the GY-HD110U at DVinfo.net

Stephen David Smith · December 30th, 2007, 01:07 PM

Apparently my CCD block is blown in my camera. I bought this camera a little over three months ago from B and H used. I am uncertain about their warranty policies on used equipment and think I might have to pay out of pocket for this replacement. Does anybody know approximately how much a new CCD block would cost?

Kit Hannah · December 30th, 2007, 01:13 PM

You'll probably just have to call JVC service this week and ask.

Mark Silva · December 31st, 2007, 12:25 PM

The going rate for replacement of 3-CCD assemblies costs about the same among the mfg's.

Expect to pay just under $ 1,000 USD including labor.

What kind of problem are you having?

Tim Ristow · December 31st, 2007, 01:19 PM

You can find some part pricing info here. Just enter your model number and it gives you a list:

http://www.jvcservice.com/Service/JMdlPrtXrf.asp

Diogo Athouguia · January 4th, 2008, 05:18 AM

I have the same problem, a few yellow dots appeared on the image and the problem is with one of the filters of the CCDs. The CCD block costs €1200 (+/-$1800) plus VAT and labour. The other option was to send the block to Japan to be repaired with laser technology. My camera is not under warranty but, since it was a manufactury issue JVC will repair it free of charge. The problem is that I will have to wait around 3 months for it... I decided to buy the HD200 and then sell this one.

Randy Johnson · January 9th, 2008, 08:23 PM

so according to that the DV assembly Firewire I assume is $33.01 and they charge $2,000 to repair a Firewire port?!?!? What a rip!

Kit Hannah · January 10th, 2008, 12:48 AM

Quote:

Originally Posted by Randy Johnson

so according to that the DV assembly Firewire I assume is $33.01 and they charge $2,000 to repair a Firewire port?!?!? What a rip!

Hahaha, LOL.... How much do you think it costs to make the camera?....If you really knew, you'd be pissed! These companies gotta afford all that advertising somehow.

Randy Johnson · January 10th, 2008, 10:01 PM

I know its cheaper for them to make the camera but usally the parts are over priced. I would think a Firewire board would be a least a few hundred bucks. If that is the right part.

December 30th, 2007, 01:07 PM	#1
Stephen David Smith Regular Crew Join Date: Oct 2005 Location: Flint/Davison MI Posts: 37	How much does it cost to replace a CCD block for the GY-HD110U Apparently my CCD block is blown in my camera. I bought this camera a little over three months ago from B and H used. I am uncertain about their warranty policies on used equipment and think I might have to pay out of pocket for this replacement. Does anybody know approximately how much a new CCD block would cost?

December 31st, 2007, 01:19 PM	#4
Tim Ristow New Boot Join Date: Mar 2007 Location: Bastrop, TX Posts: 12	JVC part pricing You can find some part pricing info here. Just enter your model number and it gives you a list: http://www.jvcservice.com/Service/JMdlPrtXrf.asp __________________ Tim Ristow Producer

December 30th, 2007, 01:13 PM	#2
Kit Hannah Major Player Join Date: Jan 2007 Location: Fresno, California Posts: 528	You'll probably just have to call JVC service this week and ask.

December 31st, 2007, 12:25 PM	#3
Mark Silva Major Player Join Date: Apr 2006 Location: Pacific NW Posts: 431	The going rate for replacement of 3-CCD assemblies costs about the same among the mfg's. Expect to pay just under $ 1,000 USD including labor. What kind of problem are you having?

January 4th, 2008, 05:18 AM	#5
Diogo Athouguia Major Player Join Date: May 2005 Location: Portugal Posts: 282	I have the same problem, a few yellow dots appeared on the image and the problem is with one of the filters of the CCDs. The CCD block costs €1200 (+/-$1800) plus VAT and labour. The other option was to send the block to Japan to be repaired with laser technology. My camera is not under warranty but, since it was a manufactury issue JVC will repair it free of charge. The problem is that I will have to wait around 3 months for it... I decided to buy the HD200 and then sell this one.

January 9th, 2008, 08:23 PM	#6
Randy Johnson Trustee Join Date: Sep 2007 Location: Newark, Delaware Posts: 1,067	so according to that the DV assembly Firewire I assume is $33.01 and they charge $2,000 to repair a Firewire port?!?!? What a rip!

January 10th, 2008, 10:01 PM	#8
Randy Johnson Trustee Join Date: Sep 2007 Location: Newark, Delaware Posts: 1,067	I know its cheaper for them to make the camera but usally the parts are over priced. I would think a Firewire board would be a least a few hundred bucks. If that is the right part.