|
|||||||||
|
Thread Tools | Search this Thread |
April 4th, 2019, 11:22 AM | #1 |
Regular Crew
|
Please help error message
im on a shoot camera is showing on screen now "TURN POWER OFF TURN BACK ON LATER"
left it off for an hour, no change , 3 hours later no change please anyone urgent solution needed
__________________
There Can Be Only One |
April 4th, 2019, 06:24 PM | #2 |
Obstreperous Rex
|
Re: Please help error message
Which specific JVC camcorder model please?
|
April 4th, 2019, 10:05 PM | #4 |
Inner Circle
Join Date: May 2004
Location: USA
Posts: 3,005
|
Re: Please help error message
Sounds like it needs to be sent out for repair. hope your shooting with a backup.
Last edited by Pete Cofrancesco; April 5th, 2019 at 06:30 AM. |
April 5th, 2019, 04:42 AM | #5 |
Regular Crew
|
Re: Please help error message
This is the backup camera used to shoot b roll
I managed to download firmware and installing it but error message has returned, and diagnostic mode is no help either
__________________
There Can Be Only One |
April 5th, 2019, 10:02 AM | #6 |
Major Player
Join Date: Jun 2008
Location: Milwaukee WI
Posts: 691
|
Re: Please help error message
Has camera gone from air conditioned to hot/humid conditions that may have caused condensation inside the camera? I believe some Sony cameras actually have a dew warning when moisture is detected, sounds similar in that it is telling you to wait and try again later (when temperature/humidity situation is equalized).
Thanks Jeff
__________________
Jeff Pulera Safe Harbor Computers |
April 5th, 2019, 01:20 PM | #7 |
Regular Crew
|
Re: Please help error message
Im afraid its not that , I spoke to technical support and they say its a lens issue ,and it seems to be a big problem in the series 170,180,190,200,250 series cameras ls300 is not affected because it does not have a lens
__________________
There Can Be Only One |
| ||||||
|
|