neo to 5.0 ? at DVinfo.net

Dale Guthormsen · May 28th, 2010, 09:39 PM

Good evening,

Was wondering if projects and files can be transferred back and forth between neo and 5.0.

dale

thanks

Cliff Etzel · May 29th, 2010, 07:27 PM

Quote:

Originally Posted by Dale Guthormsen

Good evening,

Was wondering if projects and files can be transferred back and forth between neo and 5.0.

dale

thanks

Dale - I had the same question and sent off to Edius Tech support: The response was as long as you DON'T apply any features from Edius 5 that aren't available in Neo 2/2.5 booster, you can interchange back and forth. Neo 2/2.5 Booster would be a good for the basic cutting, then bring into Edius 5.1x-5.5 for grading/finishing.

The only sure way to verify is to have two computers with one of each NLE and test for yourself with an external hard drive with a test project.

Pat Sipes · July 15th, 2010, 09:52 PM

Cliff is correct...you can switch them.

May 28th, 2010, 09:39 PM	#1
Dale Guthormsen Inner Circle Join Date: Jun 2005 Location: Saskatchewan Posts: 3,048	neo to 5.0 ? Good evening, Was wondering if projects and files can be transferred back and forth between neo and 5.0. dale thanks __________________ DATS ALL FOLKS Dale W. Guthormsen

July 15th, 2010, 09:52 PM	#3
Pat Sipes Regular Crew Join Date: Jun 2004 Posts: 26	Cliff is correct...you can switch them.