Focus DR-HD100 work with other camcorders? at DVinfo.net

Gan Eden · September 14th, 2010, 09:44 PM

I have an FX1 and would liek to know if it's compatable? Any ideas peeps?

Bob Hart · September 14th, 2010, 10:20 PM

From memory ( incipeint Alzheimers is probably at play here ), there are options in the DR-100 menu for recording other than slaving to the JVC but I don't know if these were options for other camera types of the Sony flavour of HDV which is different to the JVC.

If the DR-100 will take Sony HDV, it might have to be manually triggered to record and might not slave to the FX1. I gave away my printed manual when the unit was sold so I cannot refer back to it.

The Focus Enhancements threads furthur down the page may have something on the subject.

FOOTNOTE:

Gan.

With a vague memory prompting me I had a little bit of a search and read and found this quote on this thread :-

http://www.dvinfo.net/forum/focus-en...us-topics.html

START OF QUOTE
----------------------------------------------------------------------------------------
No, it will work fine with the FX-1. You must have a tape in the transport if you wish to trigger the DR-HD100 from the camera. Also, use the Syncro Slave control mode.

Hope that helps,

Matt
---------------------------------------------------------------------------------------
END OF QUOTE.

Also furthur pages along there is some discussion on mounting the unit to the JVC.

Gan Eden · September 15th, 2010, 05:10 AM

Yeah I read that too whilst searching afterwards.

Well I guess one can only try. :)

September 14th, 2010, 09:44 PM	#1
Gan Eden Regular Crew Join Date: Aug 2010 Location: Golden Outback, Australia Posts: 55	Focus DR-HD100 work with other camcorders? I have an FX1 and would liek to know if it's compatable? Any ideas peeps?

September 14th, 2010, 10:20 PM	#2
Bob Hart Inner Circle Join Date: Dec 2003 Location: PERTH. W.A. AUSTRALIA. Posts: 4,477	From memory ( incipeint Alzheimers is probably at play here ), there are options in the DR-100 menu for recording other than slaving to the JVC but I don't know if these were options for other camera types of the Sony flavour of HDV which is different to the JVC. If the DR-100 will take Sony HDV, it might have to be manually triggered to record and might not slave to the FX1. I gave away my printed manual when the unit was sold so I cannot refer back to it. The Focus Enhancements threads furthur down the page may have something on the subject. FOOTNOTE: Gan. With a vague memory prompting me I had a little bit of a search and read and found this quote on this thread :- http://www.dvinfo.net/forum/focus-en...us-topics.html START OF QUOTE ---------------------------------------------------------------------------------------- No, it will work fine with the FX-1. You must have a tape in the transport if you wish to trigger the DR-HD100 from the camera. Also, use the Syncro Slave control mode. Hope that helps, Matt --------------------------------------------------------------------------------------- END OF QUOTE. Also furthur pages along there is some discussion on mounting the unit to the JVC. Last edited by Bob Hart; September 14th, 2010 at 10:38 PM. Reason: added text

September 15th, 2010, 05:10 AM	#3
Gan Eden Regular Crew Join Date: Aug 2010 Location: Golden Outback, Australia Posts: 55	Yeah I read that too whilst searching afterwards. Well I guess one can only try. :)