Matrox mini and 10.5.3? at DVinfo.net

Brian David Melnyk · June 16th, 2010, 03:06 PM

i have spent some hours trying to find the answer i would like to hear... fruitlessly.
B&H lists OS 10.5.6 as required for the MXO2 mini, and the Matrox site says 10.5 for the Matrox MXO2 'family' and i cannot find specifics for the mini. i am stuck at 10.5.3 for my Pro Tools 7.4.2 version and would love to avoid having to spend more for the MXO2 LE or a Pro Tools 8 upgrade (along with the grief of potential inter-program/OS bugs-all my programs are playing nicely now!!!) ...
soooooo: anyone using the Matrox MXO2 mini with 10.5.3 and final cut 6?
thanks!

Eric Darling · June 16th, 2010, 04:11 PM

Does Matrox answer the phone? I'd check direct with the source...
(800) 361-4903 in North America for the sales office, and I'd bet they could get you an answer quickly.

Andy Mees · June 16th, 2010, 06:56 PM

Hi Brian
Have asked for clarification from the dev team ... will update the thread later if/when I get it, but hopefully you'll be able to contact them or hear back from them directly before then.
Cheers
Andy

Robert Lane · June 16th, 2010, 10:40 PM

Brian,

The MXO2 family all use the same I/O and computing engine/firmware inside, it's just a matter of physical form factor and connectivity.

Here's your answer:

http://www.matrox.com/video/media/pd...o2_mac_faq.pdf

All the MXO2 devices will work with 10.5 and later.

Brian David Melnyk · June 16th, 2010, 11:36 PM

i actually live in Burundi: 800 #'s don't work and phoning 2010 from the stone age is sketchy at best- and expensive!
i have posted on the Matrox user forum also, but i see Andy Mees is tech support there too!
i will email Matrox support, but would still like to know is anyone is using this configuration...

edit: email support is only for customers with registered products...

June 16th, 2010, 03:06 PM	#1
Brian David Melnyk Major Player Join Date: Mar 2007 Location: Winnipeg Canada Posts: 532	Matrox mini and 10.5.3? i have spent some hours trying to find the answer i would like to hear... fruitlessly. B&H lists OS 10.5.6 as required for the MXO2 mini, and the Matrox site says 10.5 for the Matrox MXO2 'family' and i cannot find specifics for the mini. i am stuck at 10.5.3 for my Pro Tools 7.4.2 version and would love to avoid having to spend more for the MXO2 LE or a Pro Tools 8 upgrade (along with the grief of potential inter-program/OS bugs-all my programs are playing nicely now!!!) ... soooooo: anyone using the Matrox MXO2 mini with 10.5.3 and final cut 6? thanks!

June 16th, 2010, 04:11 PM	#2
Eric Darling Major Player Join Date: Jun 2006 Location: Savannah, GA Posts: 463	Does Matrox answer the phone? I'd check direct with the source... (800) 361-4903 in North America for the sales office, and I'd bet they could get you an answer quickly.

June 16th, 2010, 06:56 PM	#3
Andy Mees Major Player Join Date: Mar 2006 Location: Kuala Lumpur, Malaysia Posts: 645	Hi Brian Have asked for clarification from the dev team ... will update the thread later if/when I get it, but hopefully you'll be able to contact them or hear back from them directly before then. Cheers Andy

June 16th, 2010, 10:40 PM	#4
Robert Lane Go Go Godzilla Join Date: Nov 2004 Location: Scottsdale, AZ USA Posts: 2,825 Images: 15	Brian, The MXO2 family all use the same I/O and computing engine/firmware inside, it's just a matter of physical form factor and connectivity. Here's your answer: http://www.matrox.com/video/media/pd...o2_mac_faq.pdf All the MXO2 devices will work with 10.5 and later.

June 16th, 2010, 11:36 PM	#5
Brian David Melnyk Major Player Join Date: Mar 2007 Location: Winnipeg Canada Posts: 532	i actually live in Burundi: 800 #'s don't work and phoning 2010 from the stone age is sketchy at best- and expensive! i have posted on the Matrox user forum also, but i see Andy Mees is tech support there too! i will email Matrox support, but would still like to know is anyone is using this configuration... edit: email support is only for customers with registered products...