No audio on SDI A or the HDMI in? Double check your DUAL-HD setting! at DVinfo.net
DV Info Net

Go Back   DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey
Register FAQ Today's Posts Buyer's Guides

Convergent Design Odyssey
...and other Convergent Design products.

Reply
 
Thread Tools Search this Thread
Old November 1st, 2016, 12:55 PM   #1
Inner Circle
 
Join Date: May 2005
Location: Burnaby, BC, Canada
Posts: 3,053
No audio on SDI A or the HDMI in? Double check your DUAL-HD setting!

If you happen upon that your SDI A input or HDMI in has no audio being input despite the audio source being SDI/HDMI, double check your "DUAL-HD VIEWING" setting and make sure it's "SIDE BY SIDE" or "TOP/BOTTOM." If you leave the mode on "*a|B," SDI A and the HDMI input will be muted in single stream recording mode. DUAL HD settings should ideally not matter when single stream recording is activated and a single input is present, but apparently DUAL HD settings stick and can bite you in the butt if you aren't on top of making sure it's set correctly.

Just a forewarning to any Odyssey owners about this bug.
Jack Zhang is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey


 



All times are GMT -6. The time now is 06:24 AM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network