|
|||||||||
|
Thread Tools | Search this Thread |
October 3rd, 2014, 01:11 PM | #1 |
Inner Circle
Join Date: Aug 2006
Location: Efland NC, USA
Posts: 2,322
|
Quad Display/Switch Question
I was playing around with the quad display today with v2.11 firmware. Having the buttons to switch between full screen displays is an improvement. I'm curious why the output mirrors the internal screen. If we were going to use this as a basic switcher wouldn't it be better to switch the chosen input to the output in full screen mode while the internal display stays quad?
Having the internal display mirrored is not very useful since I don't have any way to see what all the inputs are doing so I can choose the next shot. I do understand that this isn't intended to be a real switcher. It certainly can come in handy for down and dirty events where basic cuts were enough.
__________________
http://www.LandYachtMedia.com |
October 4th, 2014, 10:41 PM | #2 |
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Re: Quad Display/Switch Question
Dear Chris,
Yes, we want to do just as you have requested. Respectfully,
__________________
Dan Keaton Augusta Georgia |
October 5th, 2014, 06:23 AM | #3 |
Inner Circle
Join Date: Aug 2006
Location: Efland NC, USA
Posts: 2,322
|
Re: Quad Display/Switch Question
Thanks Dan.
__________________
http://www.LandYachtMedia.com |
| ||||||
|
|