MOV conversion tool at DVinfo.net

Garrett Low · April 8th, 2011, 11:41 AM

Sorry if this has already been answered but I just wanted to confirm. If I set my NF to capture MOV files and the later use the file converter to convert to MXF will the MXF file be the same as if I were to originally capture MXF files on my NF?

Thanks,
Garrett

Andy Mangrum · April 8th, 2011, 12:14 PM

Hello Garret,

Yes the file will be exactly the same is if it was recorded with your nanoFlash, Since this occurs on a lower level, there is no re compression, and the files can then be taken and played back in the nanoFlash.

(It is always best to format a CF card and use the converter to do a non-fragment copy back to the CF card)

Best Regards

Garrett Low · April 8th, 2011, 02:30 PM

Thanks Andy!

-Garrett

April 8th, 2011, 11:41 AM	#1
Garrett Low Trustee Join Date: Jul 2007 Location: Novato, CA Posts: 1,774	MOV conversion tool Sorry if this has already been answered but I just wanted to confirm. If I set my NF to capture MOV files and the later use the file converter to convert to MXF will the MXF file be the same as if I were to originally capture MXF files on my NF? Thanks, Garrett __________________ Garrett Low www.GLowMediaProductions.com

April 8th, 2011, 12:14 PM	#2
Andy Mangrum Sponsor: Convergent Design Join Date: Jul 2010 Location: Colorado Springs Colorado Posts: 166	Re: MOV conversion tool Hello Garret, Yes the file will be exactly the same is if it was recorded with your nanoFlash, Since this occurs on a lower level, there is no re compression, and the files can then be taken and played back in the nanoFlash. (It is always best to format a CF card and use the converter to do a non-fragment copy back to the CF card) Best Regards __________________ Andy Mangrum, Tech Support Convergent Design, Inc

April 8th, 2011, 02:30 PM	#3
Garrett Low Trustee Join Date: Jul 2007 Location: Novato, CA Posts: 1,774	Re: MOV conversion tool Thanks Andy! -Garrett __________________ Garrett Low www.GLowMediaProductions.com