My Sony PDW-330 at DVinfo.net
DV Info Net

Go Back   DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey
Register FAQ Today's Posts Buyer's Guides

Convergent Design Odyssey
...and other Convergent Design products.

Reply
 
Thread Tools Search this Thread
Old December 31st, 2010, 02:57 PM   #1
New Boot
 
Join Date: Feb 2010
Location: Natanya, Israel
Posts: 7
My Sony PDW-330

Does anyone know if the NF can fit my camera(via dv connector)?
tx, Moses
Moshe Gelber is offline   Reply With Quote
Old December 31st, 2010, 09:57 PM   #2
Major Player
 
Join Date: May 2006
Location: Teaneck, NJ
Posts: 659
I do not believe that the F330 has SDI. I know the 350 does. The Nano will accept SDI or HDMI. I know that neither the 330 nor the 350 have HDMI.
Ned Soltz is offline   Reply With Quote
Old January 1st, 2011, 04:08 AM   #3
Inner Circle
 
Join Date: Dec 2005
Location: Bracknell, Berkshire, UK
Posts: 4,957
Ned is correct. The only way you could use a NanoFlash on an F330 would be buy using a component to HDSDI/HDMI converter or HDV to HDSDI/HDMI converter. By the time you've done the conversion etc, the benefits of using a NanoFlash on a F330 would be small. The component output is pretty noisy and the HDV output is only 1440x1080, 4:2:0, your probably going to get better results recording internally on the optical discs.

You can't use DV or firewire to directly feed a NanoFlash.
__________________
Alister Chapman, Film-Maker/Stormchaser http://www.xdcam-user.com/alisters-blog/ My XDCAM site and blog. http://www.hurricane-rig.com
Alister Chapman is offline   Reply With Quote
Old January 1st, 2011, 08:45 AM   #4
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Moshe,

To confirm Ned's comments:

The Sony PDW-F350 has HD-SDI.

The Sony PDW-F330 does not have HD-SDI, just component outputs.

You could use a Component to HD-SDI converter so that you could use the nanoFlash.

Of course having HD-SDI is better, but a good converter can work.
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old January 1st, 2011, 10:49 AM   #5
Trustee
 
Join Date: Oct 2009
Location: Rhinelander, WI
Posts: 1,258
I would think that if you put a http://www.bhphotovideo.com/c/product/558906-REG/Blackmagic_Design_CONVMAAS_Mini_Converter_Analog_to.html between the component output of your camera and the nanoFlash that it would work. But I do not know for sure because I do not have a Sony PDW-F330.
Adam Stanislav is offline   Reply With Quote
Old January 1st, 2011, 12:50 PM   #6
Major Player
 
Join Date: Jan 2010
Location: Tinton Falls, NJ
Posts: 780
And of course remember that the component HD out of the PDW-330 doesn't contain audio or timecode, so you'll need to hook them up with additional wires.
Dave Sperling is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey


 



All times are GMT -6. The time now is 08:48 PM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network