|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 23rd, 2010, 12:51 PM
|
#1 |
|
New Boot
Join Date: May 2010
Location: Atlanta GA
Posts: 14
|
HDX900 & TC Trigger
I'm trying to use the NF with an HDX900 at 720 30P. NanoFlash set to 50 mbs Long GOP, timecode trigger, record PSF checked. Nano sees source as 720h29 (in lower left of LCD screen), with audio. Nanoflash will record when set to record button but will not record in timecode trigger. Using HD-SDI from video out of the HDX900. Why won't timecode trigger work?
|
|
|
|
August 23rd, 2010, 01:00 PM
|
#2 |
|
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Dear Skip,
Do you have System|Timecode|Source set to LTC or Embedded? If you are using an external timecode cable, then this must be set to LTC. Do you see Timecode in the upper left of the LCD on the nanoFlash?
__________________
Dan Keaton Augusta Georgia |
|
|
|
|
August 23rd, 2010, 01:13 PM
|
#3 |
|
New Boot
Join Date: May 2010
Location: Atlanta GA
Posts: 14
|
Dan,
That was it. I have set it to embedded and it works fine. Do I check the record PSF box or not? It seems to work either way? Thanks. |
|
|
|
|
August 23rd, 2010, 01:19 PM
|
#4 |
|
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Dear Skip,
720p is never PSF (as far as I know). The nanoFlash is smart enough to work even if the PSF option is checked and the input source is 720p.
__________________
Dan Keaton Augusta Georgia |
|
|
|
|
| ||||||
|
||||||
|
|
