|
|||||||||
|
Thread Tools | Search this Thread |
August 16th, 2010, 11:50 PM | #1 |
Tourist
Join Date: Jul 2010
Location: Adelaide, South Australia
Posts: 3
|
Mounting small 2 cell batteries to nanoFlash
Hi, First post ... I'd be interested to see how others mount the small 2 cell batteries to nanoFlash.
I will be using nanoFlash on a variety of cameras with different powering options. I have attached a small plastic enclosure from a local component store, hole in bottom for cable, foam padding ... works a treat. |
August 17th, 2010, 06:30 AM | #2 |
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Dear Andrew,
Welcome to DVInfo.net. This is a wonderful place. As far as I know, most just use a small patch of Velcro. The battery weighs 3.8 ounces or 108 grams. We designed a battery case, built it, but we were not 100% happy with it, so we are designing a new battery case. The small 2-cell Lithium-Ion battery powers the nanoFlash for around 3 hours. I do not know the exact time.
__________________
Dan Keaton Augusta Georgia |
| ||||||
|
|