Nanoflash Settings for 30p at DVinfo.net

Julio Veas P. · July 9th, 2010, 06:34 PM

I Just Received my nanoflash yesterday, impressed with the quality with my EX-1, but I have a question regarding settings for recording 30p. the ex-1 manual says that 30p output from SDI out is a 60i signal, so do I have to set my nano to record like a 60i stream or enable PSF. it seems to me there is no difference at all?

thanks in advanced

Dan Keaton · July 9th, 2010, 06:41 PM

Dear Julio,

Just enable Record: PSF>Prog for 1080p30.

Your cameras puts out PSF, the above will convert the PSF to progressive.

To confirm, at the bottom left, when you have it right (checked), it will say 1080sf30.

Julio Veas P. · July 9th, 2010, 06:44 PM

Dan:
Thanks for the quick answer.

July 9th, 2010, 06:34 PM	#1
Julio Veas P. Regular Crew Join Date: Jun 2009 Location: Arica-Chile Posts: 41	Nanoflash Settings for 30p I Just Received my nanoflash yesterday, impressed with the quality with my EX-1, but I have a question regarding settings for recording 30p. the ex-1 manual says that 30p output from SDI out is a 60i signal, so do I have to set my nano to record like a 60i stream or enable PSF. it seems to me there is no difference at all? thanks in advanced

July 9th, 2010, 06:41 PM	#2
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Julio, Just enable Record: PSF>Prog for 1080p30. Your cameras puts out PSF, the above will convert the PSF to progressive. To confirm, at the bottom left, when you have it right (checked), it will say 1080sf30. __________________ Dan Keaton Augusta Georgia

July 9th, 2010, 06:44 PM	#3
Julio Veas P. Regular Crew Join Date: Jun 2009 Location: Arica-Chile Posts: 41	Dan: Thanks for the quick answer.