NanoFlash update firmware ... at DVinfo.net

Dean Harrington · September 8th, 2009, 06:08 PM

Tommy,
When you say on the procedure for applying the update from 1.0.19 firmware you state, "When the update completes (~5 minutes, it will give an update complete message),
leave the update card in the nanoFlash (in spite of the prompt saying "remove update card")
and power cycle nanoFlash."
What do you mean by "power cycle nanoFlash?" Does it mean turn the unit off and on or does it mean something else?

Dean Harrington · September 8th, 2009, 06:40 PM

you did mean turn the unit off and on.

Dan Keaton · September 8th, 2009, 08:16 PM

Dear Dean,

Yes, at the proper prompt, "Power Cycle nanoFlash", power the nanoFlash off, then back on.

David Issko · September 9th, 2009, 01:51 AM

The update works perfectly. Thanks Tommy & CD for that.

Ramji Meena · September 12th, 2009, 06:11 AM

Hi Keaton
1.when i unziped the folder there was no }UPD{ folder but two folders namely file convertor and _MACOSX i dont know how to proceed further.Please help me.
2.Moreover I didnt find a 4pin male hirose connector for battery power supply.What is the cost of this connector.I believe you can give it complementary as i am facing lot of problems in making a power supply arrangements
Ramji

Dan Keaton · September 12th, 2009, 06:44 AM

Dear Ramji,

I believe that you downloaded our File Converter software and not the firmware update for the nanoFlash.

Here is the link to our nanoFlash Firmware Update downloads page.

The top item is the nanoFlash Firmware Update

nanoFlash Downloads

We offer a full range of power options for the nanoFlash.

What camera are you using?

What battery system are you currently using?

Ramji Meena · September 12th, 2009, 06:57 AM

Hi Keaton
my camera is PMW EX3. I could not get the 4 pin hirose connector
Ramji

Dan Keaton · September 12th, 2009, 07:25 AM

Dear Ramji,

Please feel free to call me Dan, Keaton is my last name.

We recommend the Swit S-8U62 battery, www.Dolgin.net.

Swit S-8u62 Battery

We offer a D-Tap to 4-Pin Female Hirose Power cable for this and other battery systems that have a D-Tap output.

Where did you purchase your nanoFlash? We can provide these cables to your dealer, or if appropriate, provide these cables directly to you.

Ramji Meena · September 12th, 2009, 10:12 AM

We offer a D-Tap to 4-Pin Female Hirose Power cable for this and other battery systems that have a D-Tap output.

Where did you purchase your nanoFlash? We can provide these cables to your dealer, or if appropriate, provide these cables directly to you.[/QUOTE]

Hi Keaton,
I purchased it from Kenneth Sim Image4D singapore.Please sent these cables to him.I urgently need it.It is bad that you do not supply them with the Nano.
Ramji

Dan Keaton · September 12th, 2009, 10:25 AM

Dear Ramji,

While this is a popular cable, not everyone needs this cable.

As such, including this cable with every nanoFlash just increases the cost of the nanoFlash.

Ramji Meena · September 12th, 2009, 11:09 AM

sorry Keaton
In a country like india we feel extremely frustrated when we dont get these cables.Even the 4pin hirose connector is not available.
Ramji

Steve Brown · September 14th, 2009, 06:41 PM

Dan,

Has the pdf manual been updated? I will re-print a copy if changes have been made.

Steve Brown · September 14th, 2009, 07:25 PM

After checking it a little myself, I see that it has. Thanks!

September 8th, 2009, 06:08 PM	#1
Dean Harrington Major Player Join Date: Nov 2002 Location: Tokyo Posts: 898	NanoFlash update firmware ... Tommy, When you say on the procedure for applying the update from 1.0.19 firmware you state, "When the update completes (~5 minutes, it will give an update complete message), leave the update card in the nanoFlash (in spite of the prompt saying "remove update card") and power cycle nanoFlash." What do you mean by "power cycle nanoFlash?" Does it mean turn the unit off and on or does it mean something else?

September 8th, 2009, 06:40 PM	#2
Dean Harrington Major Player Join Date: Nov 2002 Location: Tokyo Posts: 898	Ok ... you did mean turn the unit off and on.

September 8th, 2009, 08:16 PM	#3
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Dean, Yes, at the proper prompt, "Power Cycle nanoFlash", power the nanoFlash off, then back on. __________________ Dan Keaton Augusta Georgia

September 9th, 2009, 01:51 AM	#4
David Issko Major Player Join Date: Jul 2008 Location: Melbourne, Australia Posts: 393	The update works perfectly. Thanks Tommy & CD for that. __________________ David Issko Edit 1 Video Productions

September 12th, 2009, 06:11 AM	#5
Ramji Meena Regular Crew Join Date: Feb 2009 Location: MUMBAI INDIA Posts: 109	Firm ware update is difficult Hi Keaton 1.when i unziped the folder there was no }UPD{ folder but two folders namely file convertor and _MACOSX i dont know how to proceed further.Please help me. 2.Moreover I didnt find a 4pin male hirose connector for battery power supply.What is the cost of this connector.I believe you can give it complementary as i am facing lot of problems in making a power supply arrangements Ramji

September 12th, 2009, 06:44 AM	#6
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Ramji, I believe that you downloaded our File Converter software and not the firmware update for the nanoFlash. Here is the link to our nanoFlash Firmware Update downloads page. The top item is the nanoFlash Firmware Update nanoFlash Downloads We offer a full range of power options for the nanoFlash. What camera are you using? What battery system are you currently using? __________________ Dan Keaton Augusta Georgia

September 12th, 2009, 06:57 AM	#7
Ramji Meena Regular Crew Join Date: Feb 2009 Location: MUMBAI INDIA Posts: 109	Power supply Hi Keaton my camera is PMW EX3. I could not get the 4 pin hirose connector Ramji

September 12th, 2009, 07:25 AM	#8
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Ramji, Please feel free to call me Dan, Keaton is my last name. We recommend the Swit S-8U62 battery, www.Dolgin.net. Swit S-8u62 Battery We offer a D-Tap to 4-Pin Female Hirose Power cable for this and other battery systems that have a D-Tap output. Where did you purchase your nanoFlash? We can provide these cables to your dealer, or if appropriate, provide these cables directly to you. __________________ Dan Keaton Augusta Georgia

September 12th, 2009, 10:12 AM	#9
Ramji Meena Regular Crew Join Date: Feb 2009 Location: MUMBAI INDIA Posts: 109	We offer a D-Tap to 4-Pin Female Hirose Power cable for this and other battery systems that have a D-Tap output. Where did you purchase your nanoFlash? We can provide these cables to your dealer, or if appropriate, provide these cables directly to you.[/QUOTE] Hi Keaton, I purchased it from Kenneth Sim Image4D singapore.Please sent these cables to him.I urgently need it.It is bad that you do not supply them with the Nano. Ramji

September 12th, 2009, 10:25 AM	#10
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Ramji, While this is a popular cable, not everyone needs this cable. As such, including this cable with every nanoFlash just increases the cost of the nanoFlash. __________________ Dan Keaton Augusta Georgia

September 12th, 2009, 11:09 AM	#11
Ramji Meena Regular Crew Join Date: Feb 2009 Location: MUMBAI INDIA Posts: 109	sorry Keaton In a country like india we feel extremely frustrated when we dont get these cables.Even the 4pin hirose connector is not available. Ramji

September 14th, 2009, 06:41 PM	#12
Steve Brown Regular Crew Join Date: Aug 2009 Location: Tampa, FL Posts: 96	Dan, Has the pdf manual been updated? I will re-print a copy if changes have been made.

September 14th, 2009, 07:25 PM	#13
Steve Brown Regular Crew Join Date: Aug 2009 Location: Tampa, FL Posts: 96	After checking it a little myself, I see that it has. Thanks!