Intensity Shuttle at DVinfo.net

Peter Moretti · April 28th, 2010, 01:57 AM

Intensity Shuttle is coming out w/ a USB 3 interface. I would think Intensity Pro's PCI Express is better, although it requires a workstation instead of a laptop.

Any reason, to go with Shuttle over Pro for CineForm NeoHD capture besides that USB 3 can work with some laptops?

Also, are there still sometimes audio sync issues w/ Intensity capture, or have these been ironed out?

Thanks much!

Tom Santopolo · May 6th, 2010, 01:54 PM

I believe the shuttle requires an X58 motherboard. It requires 2 PCI Express 2.0 lanes that run at 16X each. One for your video card and one for your USB3 card. The X58 based motherboards are the only ones that have 2 of them that run at 16X each. I am not sure there is a laptop out at this point that can run the shuttle.

Here is the manufactures requirements:
Installation: USB 3.0. Requires x58 based computer or better with a USB 3.0 connection. Does not support USB 2.0 capture and playback. Please check the Support pages to see the full system requirements.

Also check this out:
Re: USB3 for new Blackmagic Products : Blackmagic Design

Peter Moretti · May 10th, 2010, 01:39 AM

Tom, thanks so much for that info!

Martin Rahn · May 10th, 2010, 03:57 AM

[QUOTE=Tom Santopolo;1523969]I believe the shuttle requires an X58 motherboard. It requires 2 PCI Express 2.0 lanes that run at 16X each. One for your video card and one for your USB3 card. The X58 based motherboards are the only ones that have 2 of them that run at 16X each. I am not sure there is a laptop out at this point that can run the shuttle.

Here is the manufactures requirements:
Installation: USB 3.0. Requires x58 based computer or better with a USB 3.0 connection. Does not support USB 2.0 capture and playback. Please check the Support pages to see the full system requirements.

UNQUOTE]

Some new x58 motherboards support USB 3.0 natively and do not require a special card. I just built a system with an x58 mobo with USB 3.0 built in--no card required.

Martin Rahn

Tom Santopolo · May 10th, 2010, 06:21 AM

Yes I know. But I am not sure if even those are fast enough. The chips are still under development, It appears the unit needs the full speed of USB3. Matrox doesn't really list any compatible motherboards or devices with USB3 built in.

Ben Denham · November 6th, 2010, 07:40 PM

From Black Magic Support FAQ

"Can I use a USB 3.0 ExpressCard in my Mac or Windows notebook?

ExpressCards for notebooks are not supported and will not work. The bandwidth they currently support is not suitable for Intensity Shuttle, UltraStudio Pro or Pocket UltraScope."

Blackmagic Design: Support Detail

April 28th, 2010, 01:57 AM	#1
Peter Moretti Trustee Join Date: Mar 2007 Location: Sherman Oaks, CA Posts: 1,259	Intensity Shuttle Intensity Shuttle is coming out w/ a USB 3 interface. I would think Intensity Pro's PCI Express is better, although it requires a workstation instead of a laptop. Any reason, to go with Shuttle over Pro for CineForm NeoHD capture besides that USB 3 can work with some laptops? Also, are there still sometimes audio sync issues w/ Intensity capture, or have these been ironed out? Thanks much! __________________ Avid Media Composer 3.1.3. Boris Red and Continuum Complete. Vegas 8.0c. TMPGEnc Xpress Pro 4.0

May 10th, 2010, 01:39 AM	#3
Peter Moretti Trustee Join Date: Mar 2007 Location: Sherman Oaks, CA Posts: 1,259	Tom, thanks so much for that info! __________________ Avid Media Composer 3.1.3. Boris Red and Continuum Complete. Vegas 8.0c. TMPGEnc Xpress Pro 4.0

May 10th, 2010, 03:57 AM	#4
Martin Rahn Regular Crew Join Date: Oct 2007 Location: Jackson New Jersey Posts: 41	Intensity Shuttle [QUOTE=Tom Santopolo;1523969]I believe the shuttle requires an X58 motherboard. It requires 2 PCI Express 2.0 lanes that run at 16X each. One for your video card and one for your USB3 card. The X58 based motherboards are the only ones that have 2 of them that run at 16X each. I am not sure there is a laptop out at this point that can run the shuttle. Here is the manufactures requirements: Installation: USB 3.0. Requires x58 based computer or better with a USB 3.0 connection. Does not support USB 2.0 capture and playback. Please check the Support pages to see the full system requirements. UNQUOTE] Some new x58 motherboards support USB 3.0 natively and do not require a special card. I just built a system with an x58 mobo with USB 3.0 built in--no card required. Martin Rahn

May 6th, 2010, 01:54 PM	#2
Tom Santopolo Regular Crew Join Date: May 2004 Location: Vermont Posts: 60	I believe the shuttle requires an X58 motherboard. It requires 2 PCI Express 2.0 lanes that run at 16X each. One for your video card and one for your USB3 card. The X58 based motherboards are the only ones that have 2 of them that run at 16X each. I am not sure there is a laptop out at this point that can run the shuttle. Here is the manufactures requirements: Installation: USB 3.0. Requires x58 based computer or better with a USB 3.0 connection. Does not support USB 2.0 capture and playback. Please check the Support pages to see the full system requirements. Also check this out: Re: USB3 for new Blackmagic Products : Blackmagic Design

May 10th, 2010, 06:21 AM	#5
Tom Santopolo Regular Crew Join Date: May 2004 Location: Vermont Posts: 60	Yes I know. But I am not sure if even those are fast enough. The chips are still under development, It appears the unit needs the full speed of USB3. Matrox doesn't really list any compatible motherboards or devices with USB3 built in.

November 6th, 2010, 07:40 PM	#6
Ben Denham Regular Crew Join Date: Jul 2009 Location: NSW Australia Posts: 149	From Black Magic Support FAQ "Can I use a USB 3.0 ExpressCard in my Mac or Windows notebook? ExpressCards for notebooks are not supported and will not work. The bandwidth they currently support is not suitable for Intensity Shuttle, UltraStudio Pro or Pocket UltraScope." Blackmagic Design: Support Detail