|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 8th, 2007, 09:00 AM
|
#1 |
|
Inner Circle
Join Date: Dec 2003
Location: PERTH. W.A. AUSTRALIA.
Posts: 4,477
|
Prospect HD Help if possible.
I am not sure whether it is my mismangement of the software or whether it or the system has gone a bit psycho.
Whereas I have been quite happily capturing and converting in separate stages some quite long clips, this most recent time around, there's some problems come up. Captures are fine. Converts stall at random lengths and never make it to the end of the clip. Attempts to play back a redex marked clip paralyse the computer and it has to be brutally put down like the mad dog it becomes. (CTR+ALT+DEL, not the .22 CAL.). The Capture Log screen gives this info :- (i) 2007-08-08 22:52:13 CineForm HDLink Capture Application version 2.2.5 started. (i) 2007-08-08 22:52:13 CineForm Prospect/NEO HD - (3.3.3. Build 127) then follows the ready to capture etc.. As the system has previously been okay I thought all was well however I have noted a few revisions have come along since. Should I try to download and install these or will there be more wreckage done if I try it? Last edited by Bob Hart; August 8th, 2007 at 09:01 AM. Reason: error |
|
|
|
August 8th, 2007, 09:03 AM
|
#2 |
|
CTO, CineForm Inc.
Join Date: Jul 2003
Location: Cardiff-by-the-Sea, California
Posts: 8,095
|
Get the latest, lot of good fixes.
__________________
David Newman -- web: www.gopro.com blog: cineform.blogspot.com -- twitter: twitter.com/David_Newman |
|
|
|
|
| ||||||
|
||||||
|
|
