|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 19th, 2007, 12:36 PM
|
#16 |
|
Regular Crew
Join Date: Dec 2005
Location: Santa Cruz, CA
Posts: 133
|
Thanks for the posts guys.
I am here right now with my audio guy and we are sorting through this stuff. He is using a sound devices 442 sending line level. I have the XL-H1 set to line level input with all attenuators off and in manual mode. I turn the dial up and once it reaches about -22 it wont go any higher, even though the nob is at about 3/4. If I turn the nob higher, it just sticks at about -22. All 3 of my XL-H1s are doing the same thing, so no broken camera here. Also, when switched to auto line mode, it still sticks at -22 According to the SD442 manual, line output is "+4dbu nominal" |
|
|
|
July 19th, 2007, 01:16 PM
|
#17 |
|
Trustee
Join Date: Mar 2002
Location: Ann Arbor, MI
Posts: 1,334
|
This is using XLR straight out of the SD and straight into the H1's
XLR in back? If so, I wonder if the Sound Devices is pin 3 hot or somehow the XLR cable is not wired correctly. Have you tried another cable? WHat happens when the H1 is set to mic level?
__________________
Jacques Mersereau University of Michigan-Video Studio Manager |
|
|
|
|
| ||||||
|
||||||
|
|
