|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
November 2nd, 2006, 08:09 AM
|
#1 |
|
Tourist
Join Date: Mar 2005
Location: italy
Posts: 4
|
Underwater Housing help on H1
Thanks anyone for great help!
I had a Xl2 and I am planning to get my H1. I need to use it underwater. Now I am on a Gates, specificaly for Xl2 (4000 USD). These days I discovered that Canon H1 wil not fit Gates Xl2 housing even they are almost the same size (the H1 is 1 millimiter taller). Using the Xl2 inside Gates housing the shoulder pad a the viewfinder need to be removed: no problem because it has some screws... Canon support can't help me about removing the shoulder pad on the H1: "it could be removed but we do not suggest to do it because some electricalcomponents...". The new Gates H1 Housing will get around 9000 USD. So I really would use my old one (for XL2). The question is: Is it possibile to remove the shoulder pad on the H1 without damaging the camera? I will not use the output at 1.5 gbits, so... Anyone of you know if is possible cut off some cables inside the shoulderpad without compromising... Thanks for help, Gabriele
__________________
Me and Canon |
|
|
|
| ||||||
|
||||||
|
|
