|
|||||||||
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Trustee
Join Date: Jan 2006
Location: New York, NY
Posts: 1,267
|
Settings for XLH1 to DVX
Here are the settings I used to make a closer match between my XLH1 and my DVX-100A. A greyscale chart and waveform/vectorscope and 19inch CRT monitor where used. These settings work best in 3200K and I don't know if they apply to any other DVX-100A or XLH1. Also the Knee in the DVX-100A seemed to only have an auto setting. I was using the XLH1 in manual mode and used the low setting for the Knee but Auto might be better in some situations, HTH This was for a 30F shoot but I didn't see much difference in 60i or 24F as far as the scopes where concered
DVX Cinelike Gamma Everything is else zeroed out except for auto exposure -1 XLH1 Custom Preset 3200K Preset White Balance Gamma Cine 2 Knee Low or Auto Black Middle Master Ped +3 Set Up 0 Sharp -5 HDF Low DHV 0 Cor 0 NR1 off NR2 Off CMX Normal CGN -2 CPH 0 RGain -1 GGain -1 BGain -1 RGM 0 RBM 0 GRM 0 GBM 0 BRM 0 BGM 0 |
![]() |
![]() |
![]() |
#2 |
Obstreperous Rex
|
Split from this thread: http://www.dvinfo.net/conf/showthread.php?t=68234
Daniel's preset is available for download from our XL H1 Custom Presets library. |
![]() |
![]() |
![]() |
| ||||||
|
|