|
|||||||||
|
Thread Tools | Search this Thread |
February 17th, 2009, 01:34 PM | #1 |
Trustee
Join Date: Jul 2004
Location: Canton, Ohio
Posts: 1,771
|
Quick insight on audio output problems if possible?
I am needing to get audio from the camera out to an external source via the RCA jacks on the side of the camera. I have done this before. Now....for no reason that I can see at the moment, it is not working. In either camera mode or playback mode, I am not getting any signal coming out of the analog outputs. At the moment I have no other device to verify that the audio device I am connecting to is working, except when I phyically touch the end of the RCA cable I hear buzzing though the speakers...but then I plug into the XL-H1 and nothing.
Anyone have any quick ideas? Maybe something obvious that I am overlooking? Thanks. |
February 17th, 2009, 06:28 PM | #2 |
Trustee
Join Date: Jan 2006
Location: New York, NY
Posts: 1,267
|
Marty,
Could be a menu setting for output. Check the Audio output settings between 1/2 and 3/4 (page 104 Manual). Are you locked into HDV or DV for playback? HTH |
February 20th, 2009, 02:37 AM | #3 |
New Boot
Join Date: Aug 2008
Location: San Diego, California
Posts: 16
|
It could also be the hardware switch on the camera located next to the BNC connector.
|
| ||||||
|
|