|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
February 18th, 2007, 02:08 PM
|
#1 |
|
Regular Crew
Join Date: Feb 2007
Location: Manchester, UK
Posts: 82
|
Mix xl1s and xl2 any problems in 4.3?
I'm about to buy a xl2 to team up with my XL1s any issues I should know about? Shooting 4.3 most of the time.
|
|
|
|
February 18th, 2007, 07:01 PM
|
#2 |
|
Inner Circle
Join Date: Sep 2002
Location: San Mateo, CA
Posts: 3,840
|
I shot a doc with an XL1 and Xl2. I found the footage from the 1 to be a little cooler, perhaps a tad more cyan or greenish, and the 2 seemed a bit warmer. But you can get a good match between the two with the XL2 settings.
|
|
|
|
|
February 18th, 2007, 07:14 PM
|
#3 |
|
Trustee
Join Date: Feb 2005
Location: Worldwide
Posts: 1,589
|
Matching the XL1s & XL2 in 4:3 mode is no problem at all. The XL2 also can be used as smaller overlay 16:9 clips on top of the XL1s clips in 4:3 mode, or visa versa. Matching colours etc is also quite easy using the XL2 presets.
In full frame clips, the XL2's extra sharpness does show however - so if it is important to the subject, and you have more XL1s footage than XL2 footage, it may be wise to lower the XL2 sharpness down a few notches. |
|
|
|
|
February 18th, 2007, 07:20 PM
|
#4 |
|
Regular Crew
Join Date: Feb 2007
Location: Manchester, UK
Posts: 82
|
cheers for the info gents.
|
|
|
|
|
| ||||||
|
||||||
|
|
